Pusat pemesinan CNC

FIRST MCV 300

Technical data:

TABLE
Table surface 700 x 350 mm
Table height from floor 835 mm
T-slots 16 mm x 63.5 mm / 4 pcs.
Workpiece weight max. 350 kg
Travel ranges:
X 610 mm
Y 355 mm
Z 460 mm
Distance from spindle center to column surface 415 mm
Distance from spindle nose / table min. 70 mm / max. 530 mm
SPINDLE
Spindle mounting SK 40 / DIN 69871 (draw bolt: DIN 69872)
Spindle speeds, stepless 10000 rpm
Spindle drive motor Siemens: 7.5 / 11.0 kW
AXIS FEED, digital feed motors, direct drives
All 3 feed motors are directly flange-mounted. Drive without timing belt!
Manufacturer of ball screws: HiWiN
X-axis
Feed motor: Siemens
Ball screw: Ø 32 x 10; C 5
Y-axis
Feed motor: Siemens
Ball screw: Ø 32 x 10; C 5
Z-axis
Feed motor: Siemens
Ball screw: Ø 32 x 10; C 5
FEED RATES:
Rapid traverse: 20 m/min for X and Y-axis, 18 m/min for Z-axis
Feeds: X - Y: 1-10 m/min.
ACCURACY
Positioning: (within 300 mm) +/- 0.005 mm
Repeatability: +/- 0.004 mm
TOOL CHANGER
Tool mounting: DIN 69871 with draw bolt DIN 69872
Changer system standard: disc changer without arm
Capacity: 10 tools
Change time: approx. 20 seconds max.
Max. tool weight: 7.0 kg
Largest tool diameter: 93 (120) mm
Max. tool length: 300 mm
AIR SUPPLY
Required pressure: 6.5 bar
Air consumption: 300 l / min.
Standard accessories:
- CNC control SIEMENS 828 D with "SHOPMILL" user interface
- Large selection of milling and drilling cycles
- Machining cycle for contour pockets / contour ribs with islands, etc.
- Graphic functions
- Tool management
- User CF card on the control panel front
- RS 232 C interface
- USB interface on the control panel front
- RCS-Commander: front ETHERNET interface for notebook PC
- 100 Mbit/sec. TCP / iP ETHERNET interface for connection to a company network
- Portable electronic handwheel
- Tapping without compensation chuck (Rigid Tapping)
- Spindle orientation
- Color screen (LCD) 10.4"
- Manual in all 3 axes
- Semi-automatic with manual feed operation
- Automatic with cycle function, CNC operation without CNC knowledge
- ISO programming
- Linking of cycle programs and ISO programs
- Large memory for created programs
- Full enclosure (CE)
- Heat exchanger for the control cabinet
Itjdpfszcazxsx Al Ajh
- Automatic tool clamping
- Automatic tool changer with 10 tools
- Spindle air blow-out
- Coolant system incl. oil separator
- Automatic central lubrication
- Work light
- Electronic handwheel for all 3 axes
- CE conformity, EMC filter
- 24 months full warranty Siemens "RSV"
- Two-tone paint: white RAL 7035, black RAL 7021
- Increase in spindle speed to 10000 rpm
- Chip conveyor in hinge chain design
- Coolant supply through the milling spindle (internal cooling) with 20 bar high-pressure pump = 55 l/min., separate tank
- Automatic tool changer without arm with 16 tools
- Preparation for 4th axis

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.