Treler separuh rendah

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Radmulden

You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.

Excerpt from equipment. Full equipment details available on request.

Gooseneck:
- Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, approx. 30 mm thick

Loading area:
- Telescopic loading area with rear incline approx. 1,000 mm x 8°
- Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D)
- Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.)
- 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN)
- 4 pairs of outward folding lashing rings (LC 5,000 daN)
- 3 pairs of outward folding lashing rings (LC 10,000 daN)
- Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN)

Landing legs:
- JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load)

Tyres:
- Tyres 235/75 R17.5 3PMSF, make at our discretion
- TPMS tyre pressure monitoring system in accordance with ECE R 141
- Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992
- For correct display, the towing vehicle must be able to receive and display this data

Axles:
- BPW axles and suspension, 2 axles rigid, 3rd axle self-steering
- Technical axle load: 12,000 kg
- Electromagnetic reverse lockout activated automatically when reversing and manually
- Air suspension with lifting and lowering valve. Axle tools

Braking system:
- WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit

Electrical system:
- Electrical system per EU regulations
- LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with the indicator
- ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098

Steel construction:
- Steel structure made of high-strength fine-grained steels
- Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)

Paintwork:
- Complete steel structure automatically shot-blasted after welding in a wheel-blasting system
- Second shot-blasting with corundum for optimum coating adhesion
- HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection
- Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White
- Metallic finish not available
- Paint structure tested in salt spray test according to ISO 9227-NSS
- Internal cavities sealed with special wax

Including the following accessories:
Isdjw Tpq Dspfx Abdobd
- On the gooseneck and rear, left and right, one holder for warning signs each, including socket
- Spare wheel holder in front of the front wall (without spare wheel)
- 2-inch king pin
- Galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanized front connection bar
- Galvanized folding supports under the inclination at the rear of the loading area
- A hardwood crash protection strip at the rear wall from gooseneck to the loading area
- 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN)
- Aluminium drop sides and tailgate on the gooseneck

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.