Pusat pemesinan mendatarEXCELLO
XB 420
Data mesin
- Nama mesin:
- Pusat pemesinan mendatar
- Pengeluar:
- EXCELLO
- Model:
- XB 420
- Nombor mesin:
- 1110001
- Tahun pembuatan:
- 1998
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Jarak gerakan paksi X:
- 1,250 mm
- Jarak perjalanan paksi-Y:
- 1,000 mm
- Jarak gerakan paksi Z:
- 800 mm
- Berat kepingan kerja (maks.):
- 1,500 kg
- Kelajuan gelendong (maks.):
- 3,500 rpm
penyediaan
- Lokasi:
- Nordrhein-Westfalen, Jerman
– Jarak: lebih kurang 9,981 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- EXW
percuma
Penerangan
No reserve price – guaranteed sale to the highest bidder!
Further technical details about the machine can be found in the attached machine description.
TECHNICAL DETAILS
Travel X-axis: 1,250 mm
Travel Y-axis: 1,000 mm
Travel Z-axis: 800 mm
Spindle speed: 10 - 3,500 rpm
Number of spindles: 1
Rapid traverse X-axis: 25 m/min
Rapid traverse Y-axis: 25 m/min
Rapid traverse Z-axis: 25 m/min
Feed rate X-axis: 25 m/min
Feed rate Y-axis: 25 m/min
Feed rate Z-axis: 25 m/min
Workpiece height (max.): 1,250 mm
Workpiece diameter (max.): 1,230 mm
Workpiece weight (max.): 1,500 kg
Table width: 630 mm
Table length: 800 mm
Table load capacity: 1,500 kg
Number of tool magazine slots: 122
Holder diameter: 130 mm
Tool length: 630 mm
Tool weight: 50 kg
MACHINE DETAILS
Control: Siemens Sinumerik 840C
Coolant supply: 50 bar
Dimensions & weight
Dimensions (L x W x H): 9,500 x 8,000 x 4,300 mm
Weight: 30,000 kg
X, Y, and Z axes
Resolution: 0.001 mm
Positional uncertainty P: 0.010 mm
Position scatter Ps: 0.006 mm
B-axis
Positional accuracy (face gear disengaged): 10″
Indirect measuring system
B-axis indexing accuracy (via face gear): 6″
Machining accuracy
Circular interpolation: 0.015 mm
Runout in the work spindle taper: 0.006 mm
Pallet change accuracy: ±
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Dokumen
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A21589838
- Nombor rujukan:
- AUC-2603283
- Kemas kini:
- terakhir pada 10.04.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Zuchwil STAR MicronicsSA-12
Zuchwil STAR MicronicsSV-20
Metzingen PROFIROLL BAD DUEBENROLLEX
Garvagh DOOSANPUMA 700L
United Kingdom Heidenreich & HarbeckB3 SB Deep Hole Borer
Root NILESN30 LT 3500
București Progresul BrailaCM 2500, CM 1250
Dinkelsbühl CMAFTC 3015
Mudersbach BernardoTM 36 BLO/ R 1200
Furtwangen im Schwarzwald CitizenM32
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.