Pengekstrak Wasap Kimpalan ESTAESTA
SRF K10
Pengekstrak Wasap Kimpalan ESTA
ESTA
SRF K10
harga tetap ditambah cukai perkhidmatan
€1,600
Keadaan
Terpakai
Lokasi
Zdziechowice 

Gambar menunjukkan
Tunjukkan peta
Data mesin
Harga & Lokasi
harga tetap ditambah cukai perkhidmatan
€1,600
- Lokasi:
- Zdziechowice 167 Zdziechowice, 46-310 Gorzów Śląski, PL
Hubungi
Butiran tawaran
- ID iklan:
- A9882437
- kemas kini:
- terakhir pada 10.02.2025
Penerangan
Mobile station welding fume extractor.dust extractor,filter
ESTA SRF K-10
Fan of 1.3 Kw (230V) located on the clean side.
Extraction arm with a range of 2 m.
Capacity 950 m3/h.
Vacuum pressure of 2800 Pa.
The SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust pollution.
Welding or soldering fumes are filtered with a filtration efficiency of 99.9%.
Hfedpfx Aslqw Igof Een
The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge.
During welding, the device does not need to be connected to the compressed air network and thus remains mobile.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
ESTA SRF K-10
Fan of 1.3 Kw (230V) located on the clean side.
Extraction arm with a range of 2 m.
Capacity 950 m3/h.
Vacuum pressure of 2800 Pa.
The SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust pollution.
Welding or soldering fumes are filtered with a filtration efficiency of 99.9%.
Hfedpfx Aslqw Igof Een
The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge.
During welding, the device does not need to be connected to the compressed air network and thus remains mobile.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2018
Hantar permintaan
Telefon & Faks
+48 34 30... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
iklan kecil

9,885 km
Pengekstrakan kabus kimpalan
ESTASRF K 10
ESTASRF K 10
Iklan anda telah berjaya dipadamkan
Berlaku ralat