Treler separa dengan platform kerjaES-GE
3-Achs Sattelanhänger - Bordwände + CV
Treler separa dengan platform kerja
ES-GE
3-Achs Sattelanhänger - Bordwände + CV
Keadaan
Baharu
Lokasi
Essen 

Data asas
Harga & Lokasi
- Lokasi penjual:
- Heegstraße 6-8, 45356 Essen, Jerman

Hubungi
Butiran teknikal
Dimensi dan berat
Berat keseluruhan:
39,000 kg
Berat muatan maksimum:
32,340 kg
Gandar dan roda
Konfigurasi gandar:
3 gandar
Ciri-ciri keselamatan
ABS
Butiran tawaran
- ID iklan:
- A23360780
- Nombor rujukan:
- 36242
- Kemas kini:
- terakhir pada 21.11.2026
Penerangan
You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website.
Excerpt from the equipment list:
Complete equipment list available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads
Fifth wheel coupling
* 2-inch kingpin underrun protection: bolted version, according to EC
Side underrun protection
* According to EC, fifth wheel supports: 2 x 12 t fifth wheel supports with leveling foot and single-side operation on the front right side
Axles
* 3 x 9 t air suspension axle unit, disc brakes
* Manufacturer: SAF, with disc brake approx. 430x45 mm, ABS
* Wheel connection centered in the middle, 10 holes with ET 120
* Total stroke of the air suspension approx. 200 mm, including lifting approx. 140 mm and lowering approx. 60 mm
* Control via rotary slide valve with detent function
Braking system
* Two-line compressed air braking system according to EC with EBS and RSS
* Automatic load-dependent control
* Spring brake cylinders as parking brake
* Interchangeable coupling heads firmly mounted on the front crossmember, without connection line to the tractor unit.
Tires
* 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120
* Manufacturer of our choice, fenders: according to EC
Load securing
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 8.0 t
* 8 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.5 t
* In the outer frame, one hole every approx. 500 mm for tension straps
Front wall
* Reinforced steel construction, fixed. Interior clad with approx. 9 mm screen-printed base (approx. 1,250 mm high)
Floor
Kjdpfxs Ak Skpe Adledw
* Approx. 28 mm Z-hardwood floor recessed in the outer frame
Lighting system
* According to EC, 24 Volt, with multi-chamber lights
* LED side marker lights
* LED position lights white at the front
* LED outline lights at the rear
* License plate lights. 1x15- and 2x7-pole plug connectors on the front crossmember
Equipment
* 2 chock blocks with bracket
* Warning sign ECE 70
* Bracket for rotating beacon (without rotating beacon)
Paint finish
* Chassis and front wall sandblasted, primed and coated in one color
* Chassis: RAL 3002 carmine red
* Side walls: Anodized
* Side wall uprights: RAL 3002 carmine red
* Hubs: KTL, rims: Silver, SSV:
* Aluminum anodized, underrun protection: white (RAL 9010)
* Components: galvanized/KTL black
Contour marking
* According to EC, yellow on the sides and rear with ES-GE logo
Incl. accessories
* First axle liftable, with fully automatic, load-dependent lift control
* PVC fenders in front of and behind the axle unit
* Spare wheel holder: 1 piece, double basket with fastening material for a spare wheel with ET 120
* 10 pairs of stake pockets in the outer frame, evenly distributed
* 4 rows of stake pockets across the loading area
* 20 pieces of stakes made of galvanized tube 80/50
* Total length approx. 1,000 mm, inside on the front wall a magazine for 20 pieces of plug-in stakes
* 5 x 25 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable
* Removable Kinnegrip stakes
* Side wall and stake magazine: under the chassis on the left and right, sliding rails for side walls and stakes
* Container locks for 1 x 40? and 2 x 20? containers, flush at the rear, container locks for 1 x 20? container in the middle
* Work light on the lamp carrier (switched via rever
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Excerpt from the equipment list:
Complete equipment list available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads
Fifth wheel coupling
* 2-inch kingpin underrun protection: bolted version, according to EC
Side underrun protection
* According to EC, fifth wheel supports: 2 x 12 t fifth wheel supports with leveling foot and single-side operation on the front right side
Axles
* 3 x 9 t air suspension axle unit, disc brakes
* Manufacturer: SAF, with disc brake approx. 430x45 mm, ABS
* Wheel connection centered in the middle, 10 holes with ET 120
* Total stroke of the air suspension approx. 200 mm, including lifting approx. 140 mm and lowering approx. 60 mm
* Control via rotary slide valve with detent function
Braking system
* Two-line compressed air braking system according to EC with EBS and RSS
* Automatic load-dependent control
* Spring brake cylinders as parking brake
* Interchangeable coupling heads firmly mounted on the front crossmember, without connection line to the tractor unit.
Tires
* 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120
* Manufacturer of our choice, fenders: according to EC
Load securing
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 8.0 t
* 8 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.5 t
* In the outer frame, one hole every approx. 500 mm for tension straps
Front wall
* Reinforced steel construction, fixed. Interior clad with approx. 9 mm screen-printed base (approx. 1,250 mm high)
Floor
Kjdpfxs Ak Skpe Adledw
* Approx. 28 mm Z-hardwood floor recessed in the outer frame
Lighting system
* According to EC, 24 Volt, with multi-chamber lights
* LED side marker lights
* LED position lights white at the front
* LED outline lights at the rear
* License plate lights. 1x15- and 2x7-pole plug connectors on the front crossmember
Equipment
* 2 chock blocks with bracket
* Warning sign ECE 70
* Bracket for rotating beacon (without rotating beacon)
Paint finish
* Chassis and front wall sandblasted, primed and coated in one color
* Chassis: RAL 3002 carmine red
* Side walls: Anodized
* Side wall uprights: RAL 3002 carmine red
* Hubs: KTL, rims: Silver, SSV:
* Aluminum anodized, underrun protection: white (RAL 9010)
* Components: galvanized/KTL black
Contour marking
* According to EC, yellow on the sides and rear with ES-GE logo
Incl. accessories
* First axle liftable, with fully automatic, load-dependent lift control
* PVC fenders in front of and behind the axle unit
* Spare wheel holder: 1 piece, double basket with fastening material for a spare wheel with ET 120
* 10 pairs of stake pockets in the outer frame, evenly distributed
* 4 rows of stake pockets across the loading area
* 20 pieces of stakes made of galvanized tube 80/50
* Total length approx. 1,000 mm, inside on the front wall a magazine for 20 pieces of plug-in stakes
* 5 x 25 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable
* Removable Kinnegrip stakes
* Side wall and stake magazine: under the chassis on the left and right, sliding rails for side walls and stakes
* Container locks for 1 x 40? and 2 x 20? containers, flush at the rear, container locks for 1 x 20? container in the middle
* Work light on the lamp carrier (switched via rever
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2003
68 Iklan dalam talian
Hantar permintaan
Telefon & Faks
+49 201 8... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Essen
9,998 km
Treler separa dengan platform kerja
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Essen
9,998 km
Treler separa dengan platform kerja
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Essen
9,998 km
Treler separa dengan platform kerja
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Iklan anda telah berjaya dipadamkan
Berlaku ralat

































