Mesin deburring kepingan logamERNST / Sematec
ATLAS EBR
Mesin deburring kepingan logam
ERNST / Sematec
ATLAS EBR
tahun pembuatan
2013
Keadaan
Terpakai
Lokasi
Hilchenbach 

Gambar menunjukkan
Tunjukkan peta
Data mesin
- Nama mesin:
- Mesin deburring kepingan logam
- Pengeluar:
- ERNST / Sematec
- Model:
- ATLAS EBR
- Nombor mesin:
- 630124
- Tahun pembuatan:
- 2013
- Keadaan:
- baik (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 2,300 h
Harga & Lokasi
- Lokasi:
- Dorfstraße 11, 57271 Hilchenbach, Deutschland

Hubungi
Butiran tawaran
- ID iklan:
- A20464360
- Kemas kini:
- terakhir pada 18.11.2025
Penerangan
DEBURRING MACHINE
MANUFACTURER: ERNST / Sematec
MODEL: ATLAS EBR
YEAR OF MANUFACTURE: 2013
Condition: Used
Operating hours: 2,300 hours
Working width: 1,500 mm
Max. material pass-through: 1,520 mm
Workpiece thickness: 1–100 mm
Feed rate: 0.5–4.0 m/min, steplessly adjustable
Conveyor belt: Rubber
Working height: 1,000 mm
Max. part weight: 160 kg/m²
Deburring roller: 420 mm diameter
50 oscillating strokes per minute
Drive motor: 15 kW
Abrasive size: 1,540 mm x 1,540 mm
ATLAS brush module – SPIN
2 rotating brush units: 300 mm x 260 mm
Vacuum system for small parts: 200 mm wide, 80 x 80 mm
Infeed table, LxWxHxWork width x Sheet thickness:
2,704 x 385 x 1,650 x 0.8–100 mm
Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm
Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm
Discharge/ belt cleaning:
2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm
Deburring module -
Power Electric Air pressure Extraction m³/h Weight
16 32 6/80 bar 2,500/25 400 kg
Brushing module -
12 24 6/80 2,500/725 1,600 kg
Rotor module -
20 40 6/10 4,500/25 1,800 kg
Discharge module -
1 2 - - 400 kg
Operating voltage: 400 V / 50 Hz
Special voltage: 480 V / 60 Hz
Control voltage: 24 V
Compressed air: 6 bar, dry and oil-free
Feed rate: 0.5 – 4 m/min stepless (option up to 1.0 – 8 m/min stepless)
Working height: 1,000 mm
Psdoxuu Dkjpfx Ahvsgw
The external filter is not included in the sale. Working width 1,500 mm, maximum thickness 100 mm, vacuum conveyor runs the full machine width. The first station is a grinding roller (foam rubber roller with abrasive paper and pneumatic tension), which can also oscillate as required and removes burrs. The second module consists of two steel wire brush rollers that round off/knock down the burrs. This is followed by a rotor module (rotating multi-brush head) for fine edge rounding.
EC Declaration of Conformity
Dust collector is not included, but we can offer a suitable unit as an option.
Operating manual included.
The machine is sold without infeed roller conveyor!
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
MANUFACTURER: ERNST / Sematec
MODEL: ATLAS EBR
YEAR OF MANUFACTURE: 2013
Condition: Used
Operating hours: 2,300 hours
Working width: 1,500 mm
Max. material pass-through: 1,520 mm
Workpiece thickness: 1–100 mm
Feed rate: 0.5–4.0 m/min, steplessly adjustable
Conveyor belt: Rubber
Working height: 1,000 mm
Max. part weight: 160 kg/m²
Deburring roller: 420 mm diameter
50 oscillating strokes per minute
Drive motor: 15 kW
Abrasive size: 1,540 mm x 1,540 mm
ATLAS brush module – SPIN
2 rotating brush units: 300 mm x 260 mm
Vacuum system for small parts: 200 mm wide, 80 x 80 mm
Infeed table, LxWxHxWork width x Sheet thickness:
2,704 x 385 x 1,650 x 0.8–100 mm
Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm
Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm
Discharge/ belt cleaning:
2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm
Deburring module -
Power Electric Air pressure Extraction m³/h Weight
16 32 6/80 bar 2,500/25 400 kg
Brushing module -
12 24 6/80 2,500/725 1,600 kg
Rotor module -
20 40 6/10 4,500/25 1,800 kg
Discharge module -
1 2 - - 400 kg
Operating voltage: 400 V / 50 Hz
Special voltage: 480 V / 60 Hz
Control voltage: 24 V
Compressed air: 6 bar, dry and oil-free
Feed rate: 0.5 – 4 m/min stepless (option up to 1.0 – 8 m/min stepless)
Working height: 1,000 mm
Psdoxuu Dkjpfx Ahvsgw
The external filter is not included in the sale. Working width 1,500 mm, maximum thickness 100 mm, vacuum conveyor runs the full machine width. The first station is a grinding roller (foam rubber roller with abrasive paper and pneumatic tension), which can also oscillate as required and removes burrs. The second module consists of two steel wire brush rollers that round off/knock down the burrs. This is followed by a rotor module (rotating multi-brush head) for fine edge rounding.
EC Declaration of Conformity
Dust collector is not included, but we can offer a suitable unit as an option.
Operating manual included.
The machine is sold without infeed roller conveyor!
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2004
Hantar permintaan
Telefon & Faks
+49 2754 ... iklan
Iklan anda telah berjaya dipadamkan
Berlaku ralat

















