Pusat pemusingan CNCEMCO
Concept Turn 460 TCM

Data mesin
- Nama mesin:
- Pusat pemusingan CNC
- pengeluar:
- EMCO
- Model:
- Concept Turn 460 TCM
- Nombor mesin:
- S4E150081
- tahun pembuatan:
- 2015
- Keadaan:
- hampir baru (terpakai)
- fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 272 h
Butiran teknikal
- Panjang pemesinan bubut:
- 510 mm
- Diameter pusing di atas sled silang:
- 300 mm
- Jarak gerakan paksi X:
- 160 mm
- Jarak gerakan paksi Z:
- 510 mm
- Kelajuan putaran (maks.):
- 6,300 rpm
- Diameter pusingan di atas alas gelongsor:
- 430 mm
penyediaan
- Lokasi:
- Bayern, Jerman
– Jarak: lebih kurang 9,770 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€2,000.00 (wajib)
percuma
Penerangan
Machine with C-axis, driven tools and bar loader!
Machine was used for training purposes and has only 272 spindle hours
TECHNICAL DETAILS
Swing diameter over bed: Ø 430 mm
Swing diameter over cross slide: Ø 300 mm
Max. turning length: 510 mm
Control: Siemens Sinumerik Operate
Travel range
Travel in X: 160 mm
Travel in Z: 510 mm
C-axis: 360°
Main spindle
Draw tube inner diameter / spindle bore: Ø 45 mm / Ø 53 mm
Speed range: 0 - 6,300 rpm
Torque on the spindle: 78 Nm
Spindle bearing (inner diameter): Ø 80 mm
Drive power: 8 / 13 kW
tool changer
Number of tool positions: 12
Mounting shaft: VDI 30
Tool cross-section for square tools: 20 x 20 mm
Shank diameter for boring bars: Ø 32 mm
Number of driven tools: 6 pieces
Torque: 16 Nm
Drive power: 4 kW
Drives
Rapid traverse speed X / Z: 24 / 30 m/min
Rapid traverse speed C: 250 rpm
Feed force in the X-axis: 4,000 N
Feed force in the Z-axis: 6,000 N
Positional scatter Ps (according to VDI 3441) X / Z: 0.003 / 0.003 mm
tailstock
Tailstock travel: 510 mm
Max. contact force: 6,000 N
Inner cone for holding the rolling center punch: MK 4
MACHINE DETAILS
Spindle hours: 272 h
Height of the rotation axis above floor: 1,100 mm
Machin
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
pemindahan bank
Butiran tawaran
- ID iklan:
- A18688676
- Nombor rujukan:
- AUC-2503038
- kemas kini:
- terakhir pada 14.03.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.