Pelarik menegakEmag
VL3
Data mesin
- Nama mesin:
- Pelarik menegak
- Pengeluar:
- Emag
- Model:
- VL3
- Tahun pembuatan:
- 2001
- Keadaan:
- dibaik pulih bengkel (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Harga & Lokasi
- Lokasi:
- Nepomucka 269, 34034 Planice-CZ, Česká republika
Butiran teknikal
- Voltan masuk:
- 400 V
- Tahun pembaikan besar terakhir:
- 2023
Butiran tawaran
- ID iklan:
- A16139189
- Kemas kini:
- terakhir pada 05.06.2026
Penerangan
Year of manufacture: 2001/2023
Manufacturer: Emag
Machine type: VL3
Technical data:
Control system: Fanuc 21i-T
Swinging diameter: approx. 210 mm
Maximum speed: 6,500 rpm
Turret: VDI 40 mm, 12 stations
The machine does not have a live tool.
Hinged belt chip conveyor
Spindle mount: GR. 5
Rotating parts conveyor.
Machine weight: approx. 5.5 t
The following work was carried out during this overhaul in 2023:
- The machine was completely disassembled, cleaned, and repainted.
- The main spindle was fitted with new bearings.
- The guides and guide shoes in the X-axis and Z-axis were replaced.
- The ball screw in the X-axis and Z-axis was replaced.
- New unit for central lubrication and new hoses.
- The hydraulic unit was inspected and serviced. The drive coupling between the motor and pump was replaced.
- The cooling unit was inspected and serviced; the temperature difference controller was replaced.
- The clamping cylinder was fitted with new bearings and seals.
- The gearbox of the A-axis was fitted with new bearings, and the coupling between the motor and gearbox was replaced.
- The electrical cabinet was cleaned.
- The control panel was replaced.
- New screen.
- New internal lighting.
- The turret was disassembled, wear parts were inspected, cleaned, and re-sealed.
- The turret encoder and encoder wheel were cleaned.
Kedpetpu Szjfx Al Asdn
- The length measuring systems in the X-axis and Z-axis were disassembled and cleaned.
- The springs of the pickup station were replaced.
- The motors of the X-axis and Z-axis were checked for bearing damage.
- The panes on the work door were replaced.
- The chip conveyor was completely disassembled, fitted with new bearings, cleaned, and painted.
- Various small parts on the machine were also replaced, of course.
The product has been described by us with the utmost care.
The description is non-binding and should be verified during an inspection.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Didaftarkan sejak: 2024
5 Iklan dalam talian
Hantar permintaan
Telefon & Faks
Kaufungen EMAGVL 3
Halberstadt HELLERH - 2000
Courbevoie nodier emagVL3
Uhingen EMAGVL3 V6.1
Oberhausen LAGUNL 1400
Uhingen EMAGVL3 MLT
Uhingen EMAGVL3 DSL
Wolkersdorf im Weinviertel Aberlink /RenishawAzimuth
Județul Brașov EMAGVL 3 HV
Iași EMAGVL2 V3.0.05
Kirchheim unter Teck KELLENBERGERKEL-VARIA UR 175-1000
Iași EMAGVL4 V3.1.03
Iași EMAGVL4 V3.1.03
Cuggiono NiigataSPN 501-P8
Iași EMAGVL3 MLT
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.