Pusat pemesinan barelumatec
SBZ 122/75
Data mesin
- Nama mesin:
- Pusat pemesinan bar
- Pengeluar:
- elumatec
- Model:
- SBZ 122/75
- Nombor mesin:
- 122000029
- Tahun pembuatan:
- 2022
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 141 h
Butiran teknikal
- Jarak gerakan paksi X:
- 4,176 mm
- Jarak perjalanan paksi-Y:
- 1,040 mm
- Jarak gerakan paksi Z:
- 540 mm
- Diameter bilah gergaji:
- 180 mm
- Kelajuan gelendong penggilingan (maks.):
- 20,000 rpm
penyediaan
- Lokasi:
- Kärnten, Austria
– Jarak: lebih kurang 9,467 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
Machine with only 141 operating hours!
TECHNICAL DETAILS
Travel range X-axis: 4,176 mm
Travel range Y-axis: 1,040 mm
Travel range Z-axis: 540 mm
Travel speed X-axis: max. 120 m/min
Travel speed Y-axis: max. 60 m/min
Travel speed Z-axis: max. 30 m/min
Machining length without end-face machining: max. 3,851 mm
Machining length with end-face machining: max. 3,525 mm
Maximum bar diameter: 180 mm
Tool storage locations in the automatic magazine: 12
Disk milling cutter diameter: 120 mm
Saw blade diameter: 180 mm
Tool length: max. 150 mm
Milling spindle speed: max. 20,000 rpm
Milling spindle power: 7 kW S1 (water-cooled)
Tool interface: HSK-F63
MACHINE DETAILS
Voltage: 400 V
Frequency: 50/60 Hz
Power: 17.5 kW
Current consumption: 25 A
Maximum motor current consumption: 20 A
Short-circuit strength (Ik/SCCR): 5 kA
Compressed air pressure: 7 bar
Dimensions & Weight
Dimensions (L x W x H): 7,643 x 2,171 x 3,000 mm
Weight: 3,800 kg
EQUIPMENT
Automatic tool changer
eluCam software
Autonomous clamping jaw displacement
Premium clamping jaw with linear guide
A-axis, continuously adjustable from -120° to +120°
C-axis, continuously adjustable from -220° to +220°
Note: Further technical details about the machine can be found in the attached document.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Dokumen
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22188577
- Nombor rujukan:
- AUC-2606227
- Kemas kini:
- terakhir pada 24.06.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.