Mesin pelarik sejagat

ELMAG PREMIUM CU 325 RD - Vario

ELMAG universal lathe PREMIUM CU 325 RD - Vario
center distance 1000mm
incl. RÖHM lathe chuck

Performance data and holders:
- Turning Ø 325-1,320 mm, without bridge 440-1,500 mm
- Turning size via slide Ø 190-940 x 6,000 mm
- Drive motor: 2,200-22,000 W, 400 V, high torque
- Lathe chuck holder: DIN 55027
- Quill holder: MK 3 - MK 6

Standard equipment:
- RÖHM three-jaw lathe chuck Ø 160 mm
- Quick-change steel holder set, 5-piece
- Halogen machine lamp
- Emergency stop button / zero voltage release
- Lathe chuck guard with safety switch
- Tool slide with splash guard
- Underframe / chip tray / splash guard
- Tool set / operating instructions / CE

Standards PREMIUM CU series:
- Heavy gray cast iron machine bed, good vibration damping
- Dismountable bridge
- Prismatic guides
- Hardened and precision-ground turning spindle, high concentricity, adjustable precision bearings
- Smooth-running rotary spindle and feed gear with oil bath
- Gear wheels made of chrome-nickel steel, hardened and precision-ground
- Feed reversal circuit
- Covered trapezoidal thread lead screw, hardened, precision ground
- Tool slide with lock nut
- Precise slide guides, adjustable
- Solid tailstock with taper turning adjustment
- Lathe accuracy according to DIN

Special accessories:
- SINO digital position indicator for 3 axes
Cgsdpfx Afjt Hg Skoysn
- Insert turning tool set 16 x 16 mm, 7-piece
- 7-piece insert set, 16 x 16 mm
- Grooving tool set incl. plates, 6-piece
- Machine shoe Ø 160 mm, 8 pcs.

on request:
- Steady rest
- Steady rest
- Steady rest with ball bearing guide
- Faceplate
- 4-jaw faceplate chuck

ADVANTAGES
Rotary spindle and feed gearbox with quick-change elements
Feed reversal
Sliding protective cover
Gear plate
Halogen lamp
Coolant pump
Emergency stop button
Rapid traverse motor Longitudinal slide

TECHNICAL DATA
Center width 1000 mm
Center height 165 mm
Turning diameter over bed 325 mm
Turning diameter over carriage 190 mm
Turning diameter without bridge 440 mm
Machine bed width 200 mm
Cross slide travel 150 mm
Top slide travel 95 mm
Turning tool cross-section, max. 16x16 mm
Lathe chuck holder (DIN 55027) no. 5
Spindle holder (turning spindle) MK 4 mm
Spindle bore 32 mm
Speed range 1, infinitely variable 85 - 405 rpm
Speed range 2, infinitely variable 470 - 2200 rpm
Longitudinal feeds (48) 0.006 - 1.77 mm/rev
Transverse feeds (48) 0.003 - 0.885 mm/rev
Metric thread dimension (48) 0.1 - 28 mm
metric modular thread (19) 0.1 - 1.75 mm
Inch thread, threads G (53) 75 - 2.5 G/'
Inch modular thread, threads G (19) 70 - 4 G/'
Quill holder MK 3
Quill diameter 40 mm
Quill travel 100 mm
Motor power 2200 W
Mains connection 400/50 V/Hz
Length (total) 2150 mm
Height (total) 1300 mm
Weight 770 kg

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.