Pusat pemesinan menegakDoosan
DMP 500 - 2SP
Data mesin
- Nama mesin:
- Pusat pemesinan menegak
- Pengeluar:
- Doosan
- Model:
- DMP 500 - 2SP
- Nombor mesin:
- MV0108-000036
- Tahun pembuatan:
- 2017
- Keadaan:
- seperti baru (mesin pameran)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 1,649 h
Butiran teknikal
- Jarak gerakan paksi X:
- 1,040 mm
- Jarak perjalanan paksi-Y:
- 520 mm
- Jarak gerakan paksi Z:
- 600 mm
- Berat kepingan kerja (maks.):
- 800 kg
- Lebar meja:
- 1,200 mm
- Panjang meja:
- 520 mm
- Kelajuan gelendong (maks.):
- 12,000 rpm
- Bilangan slot dalam majalah alat:
- 60
penyediaan
- Lokasi:
- Sachsen, Jerman
– Jarak: lebih kurang 9,543 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
CNC machining center for mass production of smaller parts with 2 vertical spindles (operating in parallel)
TECHNICAL DETAILS
X-axis travel: 1,040 mm
Y-axis travel: 520 mm
Z-axis travel: 600 mm
W-axis: 20 mm
Rapid traverse X-axis: 40 m/min
Rapid traverse Y-axis: 40 m/min
Rapid traverse Z-axis: 36 m/min
Spindle
Type: ISO #40, 7/24 Taper
Torque: 117.8 Nm
Spindle speed: 12,000 rpm
Spindle motor power: 11 - 18.5 kW
Spindle orientation: Built-in sensor
Power transmission: Direct drive
Work Table
Table surface: T-slots (4-125 x 18H8)
Table size: 1,200 x 520 mm
Workpiece height: 680 mm
Workpiece weight: 800 kg
Distance spindle to table: 150 - 750 mm
Automatic Tool Changer
Tool holder: MAS403 BT 40
Number of tool stations: 2 x 30
Tool selection: Memory Random
Maximum tool diameter: 80 mm
Maximum tool diameter (without adjacent tools): 150 mm
Maximum tool length: 300 mm
Maximum tool weight: 8 kg
Maximum tool torque: 5.88 Nm
Tool changeover time (tool-to-tool): 1.7 s
Changeover time (chip-to-chip): 3.5 s
MACHINE DETAILS
Power supply: 380 V
Rated power: 60 kVA
Full load current: 105 A
Short-circuit capacity: 5 kA
Overall height: 3,510 mm
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A19892860
- Nombor rujukan:
- AUC-2508144
- Kemas kini:
- terakhir pada 02.09.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Hessen Doosan InfracorePUMA TT 2500 SY
Nordrhein-Westfalen DOOSANPuma ST32G
Jerman Deckel MahoDMC 100 U
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.