Mesin gerudi radial berkelajuan tinggi

DONAU Danuport 540

Dimensions and Travel Ranges
Tool holder: SK 40
Table dimensions: 4000 x 800 mm
Number of T-slots: 6
T-slot spacing: 140 mm
Distance: Spindle lower edge min. 140 mm
Table upper edge max. 740 mm
Boring radius: min. 540 mm
max. 1590 mm
Travel range U-axis: 2600 mm
Travel range Y-axis: 1050 mm
Quill stroke (Z-axis): 200 mm
Nsdpfxsy Ttrte Afqsct
Column stroke (W-axis): 400 mm

Machining Data
Drilling capacity in steel St 60: 40 mm
Drilling capacity in cast iron GG 22: 50 mm
Thread cutting: St 60: M 36
Thread cutting: GG 22: M 42

Main Spindle Drive
AC motor, frequency-controlled: 5.5 kW at 100% duty cycle
Speed range: 15 - 2800 min-1
Torque: max. 250 Nm
Constant from: 15 - 200 min-1

Feed Drives
X-axis - AC servo motor: 0.25 kW
Y-axis - AC servo motor: 0.25 kW
Z-axis - AC servo motor: 4.50 kW
W-axis - AC servo motor: 2.50 kW
U-axis - AC servo motor: 2.50 kW
Rapid traverse rates (X/Y/Z): 7.5 / 7.5 / 5 m/min
Rapid traverse rates (U/W): 7.5 / 3 m/min
Feed rates, stepless: 5 - 2000 mm/min
Feed force: 12000 N

Accuracy
Positioning accuracy X, Y-axis on 1200 mm: ± 0.075 mm
Repeatability X, Y-axis: ± 0.03 mm
Positioning accuracy Z-axis: ± 0.05 mm
Repeatability Z-axis: ± 0.03 mm
Positioning accuracy W-axis: ± 0.05 mm
Repeatability W-axis: ± 0.03 mm

Electrical Data
Operating voltage / frequency: 400 / 50 V / Hz
Control voltage: 24 V
Total connected load: 13.0 kVA

CNC Control
Axes: 5 (X, Y, Z, W, U), expandable
Display: TFT flat screen, backlit, easily readable from all sides
Position data: Cartesian or polar, dimension data absolute or incremental
Units: mm or inch, or in degrees
Interpolation: 2 axes (X, Y)
Technology database: Tool management, tool suggestions based on machining process, material-dependent cutting data suggestions
Tool management: max. 500 tools
Subprogram technique: yes
Machining cycles: Cycles for centering, drilling, thread cutting, reaming, countersinking and counterboring, freely programmable cycle for special tools, dwell time possible for each cycle
Chip breaking / chip removal: possible during drilling cycle
Drilling patterns: hole pattern, hole circle, matrix
Basic software: Programming in dialog mode, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry
Zero point determination: Cycles for determining zero points by manually probing the workpiece for:
- rectangular parts mounted in any way
- round parts mounted in any way
- determination of castings and forgings
- angle detection in round parts by probing reference edges or surfaces
Data interfaces: USB interface

Painting (Repainting)
Standard painting, two-component textured paint
Machine upper part: light gray RAL 7035
Machine lower part: signal blue RAL 5005

Documentation
Operating and programming manual
Electrical circuit diagram
Spare parts drawings
Test report for mechanics, electrical components and safety devices

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.