KHASIATDMT
Kern CD 402
Data mesin
- Nama mesin:
- KHASIAT
- Pengeluar:
- DMT
- Model:
- Kern CD 402
- Nombor mesin:
- 2818.02
- Tahun pembuatan:
- 2003
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Jarak gerakan paksi X:
- 250 mm
- Diameter quill:
- 60 mm
- Jarak perjalanan quill:
- 140 mm
- Lubang gelendong:
- 64 mm
- Kelajuan gelendong (maks.):
- 4,000 rpm
penyediaan
- Lokasi:
- Sankt Gallen, Switzerland
– Jarak: lebih kurang 9,869 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
No minimum price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Swinging diameter over bed: 400 mm
Swinging diameter over cross slide: 230 mm
Travel X-axis: 250 mm
Spindle head according to DIN 55027: A6
Spindle bore diameter: 64 mm
Spindle diameter in the front bearing: 100 mm
Speed range: 1–4,000 rpm
Feed rate range, facing: 0.001–1,000 mm/rev
Feed rate range, longitudinal and thread pitches: 0.001–2,000 mm/rev
Rapid traverse rate, facing: 5 m/min
Rapid traverse rate, longitudinal: 10 m/min
Feed force, facing: 5,000 N
Feed force, longitudinal: 7,000 N
Tailstock
Arbor diameter: 60 mm
Arbor travel: 140 mm
Taper: MK 4
MACHINE DETAILS
Main spindle drive
Power of digital AC motor at 40% duty cycle: 16 kW
Power of digital AC motor at 60% duty cycle: 15 kW
Power of digital AC motor at 100% duty cycle: 12 kW
Number of gear stages: 2
Standard chuck size 1: 200 mm
Standard chuck size 2: 250 mm
Three-phase voltage: 400 V
Frequency: 50 Hz
Operating hours (according to counter): 4,521 h
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22078623
- Nombor rujukan:
- AUC-2606087
- Kemas kini:
- terakhir pada 08.06.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Dreieich MONFORTSKNC 5 - 1000 / EuroTurn
Willich BUFFALO MACHINEYBNC-22120
Jerman MONFORTSKNC 8 x 3000
Marl MICROTURNChallenger BNC-1860
Korschenbroich MIKRONWF 21 D
Bühl MONFORTSKNC 5 1500
Jerman MONFORTSKNC 5 x 1500
Cascina Faustina ECOCAEL 4610E
Hattingen VDF BoehringerDUS 630 ti x 2000
Babberich VDF BoehringerDUS 630 Ti
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.