DMG NHX5000DMG
NHX5000
DMG NHX5000
DMG
NHX5000
Tahun pembuatan
2023
Keadaan
Terpakai
Lokasi
Austria 

Data asas
- Nama mesin:
- DMG NHX5000
- Pengeluar:
- DMG
- Model:
- NHX5000
- Tahun pembuatan:
- 2023
- Keadaan:
- sedia untuk digunakan (terpakai)
- Jam operasi:
- 1,612 h
Harga & Lokasi
- Lokasi:
- , Austria

Hubungi
Butiran teknikal
Dimensi dan berat
Berat keseluruhan:
12,000 kg
Spindel
Kuasa motor gelendong:
37,000 W
Kelajuan gelendong (maks.):
20,000 rpm
Spesifikasi gandar
Jarak gerakan paksi X:
730 mm
Jarak perjalanan paksi-Y:
730 mm
Jarak gerakan paksi Z:
880 mm
Maklumat lanjut
Pengeluar pengawal:
FANUC
Model pengawal:
F31iB with CELOS
Bilangan gandar:
4
Butiran tawaran
- ID iklan:
- A23352278
- Nombor rujukan:
- AT-MIL-DMG-2023-00001
- Kemas kini:
- terakhir pada 18.11.2026
Penerangan
This 4-axis DMG NHX5000 was manufactured in 2023. It features X, Y and Z travels of 730, 730 and 880 mm, a 20,000 rpm spindle, and a 60-tool magazine. The machine also includes a two-station automatic pallet changer with 500 x 500 mm pallets. Consider the opportunity to buy this DMG NHX5000 horizontal machining centre. Contact us for further details.
Iodpfj Aky T Aox An Notp
- Total Power-On Time (Total Zeit): 6,393.1 h- Machining / Cutting Hours (Bearbeitung): 1,611.8 h- Ready Hours (Betriebsbereit): 827.3 h- Standby Hours: 3,954.2 h- Control System: Fanuc F31iB with CELOS (ERGOline Touch 21.5-inch multi-touchscreen, MAPPS system, CELOS version 006.055.009 | 48182)- Screen Display Language: English (MAPPS, NC, and PC screens)- Travel X / Y / Z: 730 / 730 / 880 mm- Rapid Traverse: 60 m/min- Acceleration: Up to 12 m/s²- Chip-to-Chip Time: 2.5 sec- Workpiece Clamping Surface (Pallet Size): 500 x 500 mm (2 pallets with tapped holes)- Pallet Changer: Automatic rotary APC with 2 stations- B-Axis Indexing: Full 4th-axis / arbitrary indexing B-axis (min. indexing angle 0.001°, direct drive DD motor, hydraulic disc brake clamping, max. speed 100 rpm)- Pallet Hydraulic Fixture Interface (Auto-Coupler): 2 hydraulic clamping circuits and 2 air check lines (max. pressure 7 MPa / 1,015 psi) with drainage circuit- Spindle: speedMASTER® high-speed motor spindle, max. 20,000 rpm- Spindle Power: 37 / 26 / 18.5 kW (50 / 34.7 / 24.7 HP) (15% ED / 30 min / continuous)- Spindle Torque: 221 / 107 / 86.8 Nm (10% ED / 15 min / continuous)- Spindle Taper: HSK-A63 (Option J-019116 overriding standard BT40)- Tool Magazine Capacity: 60 tools (Ring magazine, random sorting; Option J-019095 overriding standard 40 tools)- Magazine-Side Operation Panel: 7-inch touch panel (J-009825)- Max. Tool Diameter: 70 mm (with adjacent tools) / 170 mm (without adjacent tools)- Max. Tool Length: 550 mm- Max. Tool Weight: 12 kg- Max. Tool Moment: 7.84 Nm- Coolant Type: Water-soluble coolant specification- Coolant Tank Capacity: 800 L (tank depth 400 mm)- Chip Conveyor: External chip conveyor, rear discharge, with drum filter (discharge height 1,090 mm)- Through-Spindle Coolant (CTS): Prepared for central coolant supply / interface for 8-stage high-pressure CTS (max. 7 MPa) + coolant/air through-spindle switching function (3/8" air connection)- Band Filter & High-Pressure Unit: TMF300 band filter system (600 L tank, IFM LK1022/LK1023 level sensor, high-pressure pump 0.1–7 MPa / 1–70 bar at 32 L/min, low-pressure pump 0.5 MPa / 5 bar at 100 L/min, lift pump 0.9 bar at 240 L/min)- Coolant Chiller: Without coolant chiller (J-014459)- Oil Mist Collector Interface: Suction port Ø 200 mm + electrical parts for AFS 1600- Measuring & Monitoring: Renishaw OMP60 optical spindle probe + workpiece setter; internal Renishaw table touch sensor for tool length/diameter measurement and breakage detection; tool breakage control system in magazine; MPC (Machine Protection Control) vibration sensor system on milling spindle- Automation & Interfaces: 4-color LED signal tower (Red, Yellow, Green, Blue), EtherNet/IP interface, 10 external M-codes (relay contact AC 250 V, max.
Iodpfj Aky T Aox An Notp
- Total Power-On Time (Total Zeit): 6,393.1 h- Machining / Cutting Hours (Bearbeitung): 1,611.8 h- Ready Hours (Betriebsbereit): 827.3 h- Standby Hours: 3,954.2 h- Control System: Fanuc F31iB with CELOS (ERGOline Touch 21.5-inch multi-touchscreen, MAPPS system, CELOS version 006.055.009 | 48182)- Screen Display Language: English (MAPPS, NC, and PC screens)- Travel X / Y / Z: 730 / 730 / 880 mm- Rapid Traverse: 60 m/min- Acceleration: Up to 12 m/s²- Chip-to-Chip Time: 2.5 sec- Workpiece Clamping Surface (Pallet Size): 500 x 500 mm (2 pallets with tapped holes)- Pallet Changer: Automatic rotary APC with 2 stations- B-Axis Indexing: Full 4th-axis / arbitrary indexing B-axis (min. indexing angle 0.001°, direct drive DD motor, hydraulic disc brake clamping, max. speed 100 rpm)- Pallet Hydraulic Fixture Interface (Auto-Coupler): 2 hydraulic clamping circuits and 2 air check lines (max. pressure 7 MPa / 1,015 psi) with drainage circuit- Spindle: speedMASTER® high-speed motor spindle, max. 20,000 rpm- Spindle Power: 37 / 26 / 18.5 kW (50 / 34.7 / 24.7 HP) (15% ED / 30 min / continuous)- Spindle Torque: 221 / 107 / 86.8 Nm (10% ED / 15 min / continuous)- Spindle Taper: HSK-A63 (Option J-019116 overriding standard BT40)- Tool Magazine Capacity: 60 tools (Ring magazine, random sorting; Option J-019095 overriding standard 40 tools)- Magazine-Side Operation Panel: 7-inch touch panel (J-009825)- Max. Tool Diameter: 70 mm (with adjacent tools) / 170 mm (without adjacent tools)- Max. Tool Length: 550 mm- Max. Tool Weight: 12 kg- Max. Tool Moment: 7.84 Nm- Coolant Type: Water-soluble coolant specification- Coolant Tank Capacity: 800 L (tank depth 400 mm)- Chip Conveyor: External chip conveyor, rear discharge, with drum filter (discharge height 1,090 mm)- Through-Spindle Coolant (CTS): Prepared for central coolant supply / interface for 8-stage high-pressure CTS (max. 7 MPa) + coolant/air through-spindle switching function (3/8" air connection)- Band Filter & High-Pressure Unit: TMF300 band filter system (600 L tank, IFM LK1022/LK1023 level sensor, high-pressure pump 0.1–7 MPa / 1–70 bar at 32 L/min, low-pressure pump 0.5 MPa / 5 bar at 100 L/min, lift pump 0.9 bar at 240 L/min)- Coolant Chiller: Without coolant chiller (J-014459)- Oil Mist Collector Interface: Suction port Ø 200 mm + electrical parts for AFS 1600- Measuring & Monitoring: Renishaw OMP60 optical spindle probe + workpiece setter; internal Renishaw table touch sensor for tool length/diameter measurement and breakage detection; tool breakage control system in magazine; MPC (Machine Protection Control) vibration sensor system on milling spindle- Automation & Interfaces: 4-color LED signal tower (Red, Yellow, Green, Blue), EtherNet/IP interface, 10 external M-codes (relay contact AC 250 V, max.
Iklan-iklan ini juga mungkin menarik minat anda.
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Itali
9,967 km
DMG MORI NHX-5000
DMG MORINHX-5000
DMG MORINHX-5000
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Loyettes
10,206 km
Pusat pemesinan mendatar
DoosanHP 5100II
DoosanHP 5100II
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Düsseldorf
10,010 km
Pusat pemesinan mendatar
DMG MORINHX 5000
DMG MORINHX 5000
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Monheim am Rhein
10,007 km
Pusat pemesinan mendatar CNC
DMG MORINHX 5000
DMG MORINHX 5000
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Iași
8,496 km
Pusat pemesinan menegak
FANUCRobodrill ᾱ-D21MiB5
FANUCRobodrill ᾱ-D21MiB5
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Austria
9,967 km
DMG MORI NHX 5000
DMG MORINHX 5000
DMG MORINHX 5000
Berjaya
Mesej anda telah dihantar.
Lelong
Lelong telah tamat
Bayern
9,718 km
Pusat pemesinan mendatar
DMGNHX 5000
DMGNHX 5000
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Belgium
9,967 km
HAAS VM-6
HAASVM-6
HAASVM-6
Iklan anda telah berjaya dipadamkan
Berlaku ralat














































































































