Pusat pemesinan menegak

DAHLIH MCV-860 mit RoboJob MA 25

In-stock machine "NEW" - available for immediate delivery! (Subject to prior sale)

Control system: Fanuc 0i-MF Plus, 10.4"
with Manual Guide i & 2 MB NC memory
LOOK-AHEAD function, 400 blocks

Machine table:
Table size: 950 x 550 mm
Load capacity: 800 kg
Width of T-slots: 18 mm
Number of T-slots: 3
Distance between T-slots: 150 mm

Travel ranges:
Travel distances X/Y/Z: 860/550/550 mm
Spindle nose to table surface: 150 - 700 mm

Linear guides & speeds:
Ball guides in X/Y-axis
Roller guides in Z-axis
Rapid traverse X/Y/Z: 40/40/30 m/min
Feed rate during milling: 0 – 10,000 mm/min
Smallest increment: 0.001 mm

Tool magazine (CAM-type) / changer:
Number of magazine positions: 30
System: random access
Max. tool diameter: Ø 75 mm
Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm)
Max. tool length: 300 mm
Max. tool weight: 7 kg

Spindle:
Spindle taper: SK-40
Drive power (30min/cont.): 18.5/11 kW
15,000 rpm direct spindle drive
Spindle oil cooler

Coolant, chip, and compressed air management:
Coolant system incl. 300 liter tank and pumps
External coolant around the spindle
Hsdpoifn N Nsfx Alwefi
Chip conveyors on the right and left in the machine bed
Compressed air nozzle on the spindle (M32/M33)
Compressed air through the spindle (M38/M39)
Compressed air and coolant gun

Other:
Swiveling control panel
Electronic handwheel (wired)
Centralized lubrication oil / air
Full enclosure
Work light
Heat exchanger on the control cabinet
Auto-Power OFF function
Hand tool set
Signal light
Transformer 400 VAC, 50 Hz
CE declaration of conformity according to European directives

Electrical and pneumatic requirements:
Electrical connection: 36 kVA
Required pneumatic inlet pressure: 6 bar

Dimensions:
Machine size: W2,260 x D2,900 x H2,775 mm
Required footprint: W3,160 x D3,000 x H3,000 mm
(including chip conveyor, discharge to the left)
Machine weight: approx. 5,400 kg (net)

Existing special equipment:

Spindle:
- Direct drive spindle SK-40, 15,000 min-1
- Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor)

Tool magazine / changer:
- Tool drum magazine with 30 positions, DIN69871, SK-40

Rotary or additional axes:
- Preparation for 4th axis (FANUC control),
incl. wiring and Harting connector without axis drive

Coolant, chip, and compressed air management:
- Bed flushing
- IKZ coolant pump with 20 bar pressure, for direct-drive spindles
- incl. cartridge filter
- Belt-type chip conveyor incl. chip cart (chip removal to the front, left side of the machine)

Measuring and monitoring systems:
- RENISHAW OMP-60 measuring probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm
- RENISHAW NC4+ tool laser measuring system and tool breakage monitoring in the machine, incl. holder

- Auto-Door (side door)
- Pneumatic interface for workpiece clamping
- Clamping devices as shown in the picture

with RoboJob Mill Assist 25kg (year of manufacture 2025 - NEW)
- Full enclosure
- Dual gripper

available immediately

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.