Pencincang kayu

mütek MGZ 630

The ideal machine for shredding hardwood and softwood.
Guedod E R D Sopfx Apqod
Another machine, available immediately (ex works Neckartailfingen).

Motor: 18.5 kW; 400 V - 50 Hz - 3 phase,
Knives: 14 + 2 pieces, 40x40mm, can be rotated multiple times,
Rotor diameter: 260 mm,
Control: Omron PLC,
Cutting chamber opening: 600 x 800 mm,
Hopper volume approx. 0.6 m³,
Hydraulically operated slide
Screen size optional (12 - 40mm)
Suction nozzle Ø 160 mm
Weight approx. 1,300 kg
Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm

The following options are available at an extra cost:
- Additional knife row + €1,990 net (28 instead of 14)
- Surcharge for four-sided segment bottom + €2,170 net
(prevents the slide from jamming. Recommended for materials with a thickness of less than 3 mm)

- Raise the shredder by 30 cm (preparation for a conveyor belt) + €1,980 net
- Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net
- Overband magnet + €5,980 net
- Control system for conveyor belt and overband magnet + €2,750 net
(start and stop synchronized with the shredder)
- Special bearing + €1,540 (rarely needed. Enclosed, even more stable rotor bearing. Possibly worth considering for sieves smaller than 15 mm or with a high proportion of fine material. If the bearings are lubricated with grease, this is not necessary if operated approximately every 2 weeks)

Requirements for the raw material:
- The moisture content (dry basis) must be below 30%
- Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with photos and videos.

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.