Kamar suhu 2000 liter

CTS T-40/2000 -40°C bis +180°C

CTS
Type: T-40/2000
Air-cooled temperature test chamber
Technical design:
Refrigeration unit:
air-cooled, low-noise, fully hermetic, stepless power adjustment
via electronic monitoring and control system,
environmentally friendly refrigerant R404A
Door:
fully opening door, door hinge on the left,
one-hand operation, lockable.
Insert shelf:
stainless steel, support surface 970 x 980 + 500 mm
Load per shelf max. 35 kg
Total load with max. shelf configuration 100 kg
Test chamber lighting: 3x halogen lamp 20 W, 12 V
Control:
32-bit controller
LCD control panel
Digital display of setpoint and actual values
Numerical input of setpoints
Error messages in plain text
RS 232 interface
free switching channels for on-site test specimen control
Temperature range: -40°C to +180°C
Rated voltage: 400V 3/N 50Hz
Rated power: 10.4 kW
Rated current: 17.2 A
Compressor: TFH2516Z
Pipe connection NW 50
Control panel
Window 570x710 mm
Electrical connection, cable length 5m
Technical performance data:
Temperature tests:
Temperature range -40°C to +180°C
Temperature deviation ≤ ±0.3 K over time
Temperature change rate according to IEC 60068-3-5
Heating 2.5 K/min
Cooling 1.5 K/min
Heat radiation:
approx. 2500 W at +20°C
approx. 2100 W at ± 0°C
approx. 1500 W at -20°C
The technical data refer to an ambient temperature of +25 °C,
rated voltage 400V, without test specimen, without radiation and without additional equipment.
Dimensions:
Test volume: 2000 liters
Test chamber dimensions: Height 900, Width 975, Depth 2200 mm
External dimensions: Height 1950, Width 1290, Depth 3145 mm
Operating data:
Nlsdjzg Twaepfx Aqtec
Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz
Rated power: 17.2 kW
Protection class: IP 22
Condensate drain, unpressurized, R 1/2" internal thread
Sound pressure level (according to DIN EN ISO 3744
measured at a distance of 1m from the front) < 55 dB(A)
Weight: approx. 1200 kg
For your safety as a buyer, here is the following information!
The following points are carried out on our offered chambers in advance:
1. Functional check and replacement of necessary components
2. If necessary, refilling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will gladly answer any further questions you may have by telephone.

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.