Kabin ujian iklim 350 liter Ex/lCTS
C-40/350 Ex/l -40°C /+180°C
Kabin ujian iklim 350 liter Ex/l
CTS
C-40/350 Ex/l -40°C /+180°C
Keadaan
Terpakai
Lokasi
Borken 

Gambar menunjukkan
Tunjukkan peta
Data mesin
Harga & Lokasi
- Lokasi:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Hubungi
Butiran tawaran
- ID iklan:
- A19446591
- Nombor rujukan:
- 24669
- Kemas kini:
- terakhir pada 27.06.2025
Penerangan
CTS
Type: C-40/350 Ex/l
Climate Test Chamber, Water-Cooled
ATEX Zone 1
The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions.
Temperature Testing:
Temperature range: -40°C to +180°C
Temperature deviation: ≤ ±0.3 K over time
Temperature change rate according to IEC 60068-3-5:
Heating: 3.5 K/min
Cooling: 4 K/min
Heat compensation:
approx. 3500 W at +20°C
Kjdpswvr H Usfx Agpsnf
approx. 2000 W at -20°C
Climate Testing:
Temperature range: +10°C to +90°C
Humidity range: 10% to 95% relative humidity
Dew point range: +5°C to 78°C
Temperature deviation: ≤ 1.0 K over time
Humidity deviation: ≤ ±3.0% r.h. over time
The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data.
Technical Design:
Cooling unit:
water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A
Test chamber: Floor load capacity 150 kg/m²
Rack: Stainless steel,
support surface 620 x 600 mm
Load per rack max. 35 kg
Total load with maximum rack configuration 100 kg
Control system:
32-bit controller
LCD operating panel
Digital display of setpoint and actual values
Numeric input of setpoints
Plain text fault messages
RS 232 interface
Ethernet interface
Free switching channels for user-side test item control
Dimensions:
Test volume: 350 liters
Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm
External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm
Operating Data:
Electrical connection: 400V +6/-10%, 3/N, 50 Hz
Nominal power: 7.15 kW
Nominal current: 14.3 A
Protection class: IP 54
Sound pressure level
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Type: C-40/350 Ex/l
Climate Test Chamber, Water-Cooled
ATEX Zone 1
The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions.
Temperature Testing:
Temperature range: -40°C to +180°C
Temperature deviation: ≤ ±0.3 K over time
Temperature change rate according to IEC 60068-3-5:
Heating: 3.5 K/min
Cooling: 4 K/min
Heat compensation:
approx. 3500 W at +20°C
Kjdpswvr H Usfx Agpsnf
approx. 2000 W at -20°C
Climate Testing:
Temperature range: +10°C to +90°C
Humidity range: 10% to 95% relative humidity
Dew point range: +5°C to 78°C
Temperature deviation: ≤ 1.0 K over time
Humidity deviation: ≤ ±3.0% r.h. over time
The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data.
Technical Design:
Cooling unit:
water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A
Test chamber: Floor load capacity 150 kg/m²
Rack: Stainless steel,
support surface 620 x 600 mm
Load per rack max. 35 kg
Total load with maximum rack configuration 100 kg
Control system:
32-bit controller
LCD operating panel
Digital display of setpoint and actual values
Numeric input of setpoints
Plain text fault messages
RS 232 interface
Ethernet interface
Free switching channels for user-side test item control
Dimensions:
Test volume: 350 liters
Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm
External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm
Operating Data:
Electrical connection: 400V +6/-10%, 3/N, 50 Hz
Nominal power: 7.15 kW
Nominal current: 14.3 A
Protection class: IP 54
Sound pressure level
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2012
Hantar permintaan
Telefon & Faks
+49 2861 ... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Iklan kecil
Haiger
9,919 km
Pusat pemesinan
DMG MORICMX 600 V
DMG MORICMX 600 V
Iklan kecil
Schloß Holte-Stukenbrock
9,876 km
Pusat pemesinan
Droop & ReinModimill
Droop & ReinModimill
Iklan kecil
Kaufungen
9,817 km
Pusat pemesinan sejagat
Deckel MahoDMU 80 monoblock
Deckel MahoDMU 80 monoblock
Iklan kecil
Butzbach
9,890 km
Pusat pemesinan
Starrag-HeckertHEC500D
Starrag-HeckertHEC500D
Iklan kecil
Tatabánya
9,188 km
Mesin pengisar permukaan pengisaran permukaan
JungHF 50 (2338)
JungHF 50 (2338)
Iklan kecil
Ruhla
9,767 km
Mesin pengilangan 5 paksi
Deckel MahoDMU 70 eVlin
Deckel MahoDMU 70 eVlin
Iklan kecil
Nauen
9,582 km
Pelarut Vollrath EWFX 60
Dissolver VollrathEWFX 60
Dissolver VollrathEWFX 60
Iklan kecil
Wilbertoord
10,078 km
Pusat pemesinan - menegak
DMGDMU 40 Mono Block
DMGDMU 40 Mono Block
Iklan kecil
Arnsberg
9,930 km
Mixaco Mixer CM 1000
MixacoCM 1000
MixacoCM 1000
Iklan kecil
Sinsheim
9,887 km
Pelarut
Schneider Maschinenbau GmbhSHDC15 KWFU Ex
Schneider Maschinenbau GmbhSHDC15 KWFU Ex
Iklan anda telah berjaya dipadamkan
Berlaku ralat































































































