Pemampat skru dengan pengering + tangki 270lCORMAK
LUFT 700 VSD+PM COMPACT/ 270l tank
Pemampat skru dengan pengering + tangki 270l
CORMAK
LUFT 700 VSD+PM COMPACT/ 270l tank
harga tetap ditambah cukai perkhidmatan
€3,270
Tahun pembuatan
2026
Keadaan
Baharu
Lokasi
Siedlce 

Gambar menunjukkan
Tunjukkan peta
Data mesin
- Nama mesin:
- Pemampat skru dengan pengering + tangki 270l
- Pengeluar:
- CORMAK
- Tahun pembuatan:
- 2026
- Keadaan:
- baharu
Harga & Lokasi
harga tetap ditambah cukai perkhidmatan
€3,270
- Lokasi:
- Brzeska 120, 08-110 Siedlce, Polska

Hubungi
Butiran tawaran
- ID iklan:
- A21043037
- Kemas kini:
- terakhir pada 22.01.2026
Penerangan
CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER
SET INCLUDES:
LUFT 700 VSD+PM COMPACT screw compressor with dryer
Horizontal compressed air tank – 270 L
Key Features of the Energy Saver Series
1. Permanent Magnet (PM) Motor Technology
Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they:
Achieve efficiency levels of IE4 or even IE5
Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range)
Are smaller, lighter, and generate less heat
2. Advanced VSD Inverter Control
The heart of the Energy Saver line is the frequency inverter (VSD).
Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy.
Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process.
3. Soft Start
Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which:
Saves the electrical installation in the facility
Nsdpfx Aeycg I Sofpjwb
Allows frequent start/stop cycles without overheating the windings
4. Real Energy Savings
In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors.
Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters.
Longer service life: No sudden pressure and temperature spikes prolong the screw stage life.
Technical Specifications
Motor power: 5.5 kW / 7.5 HP
Voltage: 400V / 50Hz
Air delivery at 0–6 bar: avg. 690 L/min
Air delivery at 6 bar: 690 L/min
Air delivery at 8 bar: 650 L/min
Air delivery at 10 bar: 650 L/min
Outlet connection (G): 1/2"
Dimensions: 1495 × 520 × 1340 mm
Weight: 250 kg
SET INCLUDES:
LUFT 700 VSD+PM COMPACT screw compressor with dryer
Horizontal compressed air tank – 270 L
Key Features of the Energy Saver Series
1. Permanent Magnet (PM) Motor Technology
Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they:
Achieve efficiency levels of IE4 or even IE5
Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range)
Are smaller, lighter, and generate less heat
2. Advanced VSD Inverter Control
The heart of the Energy Saver line is the frequency inverter (VSD).
Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy.
Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process.
3. Soft Start
Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which:
Saves the electrical installation in the facility
Nsdpfx Aeycg I Sofpjwb
Allows frequent start/stop cycles without overheating the windings
4. Real Energy Savings
In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors.
Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters.
Longer service life: No sudden pressure and temperature spikes prolong the screw stage life.
Technical Specifications
Motor power: 5.5 kW / 7.5 HP
Voltage: 400V / 50Hz
Air delivery at 0–6 bar: avg. 690 L/min
Air delivery at 6 bar: 690 L/min
Air delivery at 8 bar: 650 L/min
Air delivery at 10 bar: 650 L/min
Outlet connection (G): 1/2"
Dimensions: 1495 × 520 × 1340 mm
Weight: 250 kg
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Hantar permintaan
Telefon & Faks
+48 25 63... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Iklan kecil
Δράμα
8,691 km
Jenis percetakan mengimbangi
ShinoharaSHINOHARA 75
ShinoharaSHINOHARA 75
Iklan kecil
Lorquí
10,877 km
Pemampat udara skru ATLAS COPCO GA50
Atlas CopcoGA50 VSD
Atlas CopcoGA50 VSD
Iklan kecil
Δράμα
8,691 km
Jenis percetakan mengimbangi
ShinoharaSHINOHARA 75
ShinoharaSHINOHARA 75
Iklan kecil
Europa
9,425 km
Mesin dalam talian automatik penuh untuk kotak lipat
BOBSTMIDLINE 924
BOBSTMIDLINE 924
Iklan kecil
Burgoberbach
9,764 km
Sistem lipatan mesin pembungkusan karton
Vollautomatische Anlage
Vollautomatische Anlage
Iklan anda telah berjaya dipadamkan
Berlaku ralat

























































