Pemotong lajur automatik

CORMAK H-260SA przecinarka taśmowa do metalu

The CORMAK H - 260SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen.
Automatic band saw work on manual and automatic modes.

Manual mode allows you to perform all activities manually from the machine's desktop.

Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation.

Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected.

The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder.
The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds.
The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements.

Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke.

Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation.
Technical data

Cut range Ø260 or 260 x 260
Tape 3150 x 27 x 0.9mm
Cut speeds 40/60/80m/min
Engine 2.2kW
Hydraulic power pack 0.75kW
Coolant pump 0.09kW
Feeder stroke 500mm
Load capacity 1500 kg
Dimensions 1600 x 1800 x 1550mm
Weight 1000 kg
Max. cutting range
angle
0º ø260 260 × 260
Standard equipment
Nsdpfx Ahsiz S I Hevekw

work in automatic cycle

arm position memory function

built-in hydraulic unit

vise position memory function

change cutting speed

motorized belt cleaning brush

cooling system

bi-metal band saw

CE Declaration of Conformity

Manual in Polish and English

For more information visit our web page