Ekzos industri

CORMAK DCV15000TC

The extractor has a time switch for automatic filter shaking, allowing for any setting of the work cycle!

Our technology department has placed great emphasis on creating a motor shaking system, in which the entire filter cleaning cycle takes place automatically in a closed system.
A safety lock prevents larger elements from entering the fan.
Built-in, soundproof, RETURN OF WARM AIR
Reinforced construction with special anti-corrosion coating
Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season

Advantages of DCV dust extractors

have an additional pair of doors for easier bag replacement
Durable, massive construction guaranteeing quiet and vibration-free operation of the dust collector
the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air
Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season
A strong and quiet radial fan guaranteeing you high negative pressure efficiency
Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors
A failure-free filter shaking system with the possibility of working in an automatic cycle
Bsdpfx Adeudaqysbsdk
A mobile system mobile, facilitating trouble-free movement of the extractors throughout the plant
Waste containers designed to maintain 99.99% airtightness of the system, at the same time they have been equipped with a mobile mobile system
Control cabinet for switching the device on/off
polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used
It is forbidden to use this extractor in an explosive atmosphere
The extractor is not adapted to work with wet raw materials (e.g. wet sawdust)
Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers
Reduction - Warm air return additionally payable

Technical parameters
Supply voltage 400 V
Power 18.5 kW (25 HP)
Engine speed 3000 rpm
Filter type Polyester
Filter dimensions Φ160 x 920 mm
Number of filters 117 pieces
Inlet diameter 400 mm
Outlet dimensions 595 x 345 mm x2
Efficiency 15000 m3/h
Dimensions (width x length x height) 1500 x 3830 x 2410 mm (without upper elbow)
Weight 980 kg