Alat pengukur kontur

ConturoMatic TS-UDR NEU

Modular extensible Contour measuring system

Anytime optionally via software updatable functions:
- up-down-directions Z-Scanning
- option Roughness measurement
- motorized Y-Supporting table
- axis of rotation for contour and roughness




Scope of supply:
- Basic mechanics with integrated Y-adjustment table
- Integrated control system
- PC W11/64Bit; 24"TFT flat screen;
- CunturoMatic Software; user manual

- Software option for measurement and evaluation of the following standards:
DIN EN ISO 4287 (10/1998)
DIN EN ISO 4288 (04/1998)
DIN EN ISO 11562 (04/1998)
DIN EN ISO 13565-1 (04/1998)
DIN EN ISO 13565-2 (04/1998)
VDA 2006 (07/2002)
Stahl-Eisen-Prüfblatt (SEP 1940)
- Protective cover 8988, sturdy and water repellent (material), Commodity-Code 63079098

Description of the up down function:
The scanning of surfaces in two directions is possible by the measuring direction switching function.
This can be assessed without loss of the relationship to other scans from the same measuring process.
Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs.
Additional evaluation possibilities are for example
- Raceway diameters
Laodpjgr Uzcjfx Af Hjh
- Diameter
- Thickness variation
- Parallelism
- Cone angle measurement
- Calculation of lead deviation
- Thread testing
etc.

Technical data contour measurement:
X-Measuring range 300mm
Z-Measuring range 375mm
Resolution 1nm
Sensing system optically incremental
Inaccuracy +/-(0.9µm+L/100)µm* [L=mm]
Measuring speed 0.1-3mm/s self-optimizing
Positioning speed up to 25mm/s
Gauging force regulation
Table load 35kg
Granite precision guides

Technical data roughness measurement:
Diamond tip Cone 60° R=2µm
Z-Measuring range +/-500 µm
Scope Ra > 0.08µm | Rz> 0.8µm
Probing force 7.5mN
Measuring speed 0.1mm/s

* According to our specified terms-
Subject to change without notice
without fixing system