MESIN GERUDICollet
RS 2-1
Data mesin
- Nama mesin:
- MESIN GERUDI
- Pengeluar:
- Collet
- Model:
- RS 2-1
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- fungsi terhad
Butiran teknikal
- Kedalaman penggerudian:
- 710 mm
- Kelajuan putaran (maks.):
- 1,250 rpm
- Diameter gelendong:
- 100 mm
- Panjang meja:
- 1,120 mm
- Lebar meja:
- 1,250 mm
penyediaan
- Lokasi:
- Nordrhein-Westfalen, Jerman
– Jarak: lebih kurang 9,928 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€3,400.00 (wajib)
percuma
Penerangan
By placing a bid, you commit to collecting the machine by 28.01.2026! A timely appointment is necessary after the auction ends, as the machine has not yet been dismantled!
TECHNICAL DETAILS
Working spindle diameter: 100 mm
Working spindle taper bore: ISO steep taper No. 50
Drilling depth in one pass: 710 mm
Lowest position of spindle center above table surface: 0 mm
Highest position of spindle center above table surface: 1,200 mm
Maximum distance between spindle sleeve and tailstock: 2,300 mm
Horizontal travel of tailstock: 1,300 mm
Spindle speed: 6 - 1,250 rpm
Clamping surface of the table: 1,120 mm x 1,250 mm
Longitudinal travel of the table: 1,300 mm
Transverse travel of the table: 1,200 mm
34 feed rates for spindle, headstock, and table: 0.017 - mm/rev.
Feed rates for headstock and table, stepless: 20 - 1,000 mm/min
Rapid traverse for all axes: 2,800 mm/min
MACHINE DETAILS
Main motor power: 11 kW
Main motor speed: 1,450 rpm
Current type: Three-phase
Voltage: 380 Volt
Frequency: 50 Hz
EQUIPMENT
Documentation incl. wiring diagram
Circuit diagrams
Operating manuals
Note: Brake defective, clutch dismounted (included). Repair costs in Germany approx. €3,000.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A20746757
- Nombor rujukan:
- AUC-2512082
- Kemas kini:
- terakhir pada 12.01.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Metzingen CSEPELRFh 75/2000
Metzingen COLLET & ENGELHARDTBF 130 - 11
Siegen WEBORB 45
Weiterstadt MeuserM 76 BF
Jerman COLLET-ENGELHARTDMinor
Jerman COLLET & ENGELHARD
Rödermark WAGNERWRT 66-1700
Rödermark VOLZ-V TRADEZB 60-16
Pforzheim STAMAMC 526
Jünkerath KOLBA14
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.