Pusat pemesinan menegakChiron
Mill 6000
Data mesin
- Nama mesin:
- Pusat pemesinan menegak
- Pengeluar:
- Chiron
- Model:
- Mill 6000
- Nombor mesin:
- 419-01
- Tahun pembuatan:
- 2004
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 77,374 h
Butiran teknikal
- Jarak gerakan paksi X:
- 6,000 mm
- Jarak perjalanan paksi-Y:
- 630 mm
- Model pengawal:
- Siemens 840D
- Kelajuan gelendong (maks.):
- 12,000 rpm
penyediaan
- Lokasi:
- Baden-Württemberg, Jerman
– Jarak: lebih kurang 9,923 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- EXW
percuma
Penerangan
The machine spindle was replaced in 2021 (spindle hours approx. 7,300 h)!
The machine was completely overhauled in 2013!
The machine has undergone regular annual maintenance, repairs, and has been kept up to date technically by the manufacturer (preventive maintenance). The last service was carried out in January 2024.
TECHNICAL DETAILS
4 axes
X-axis travel: 6,000 mm
Y-axis travel: 630 mm
Z-axis travel: 550 mm
B-axis swivel range: ± 100°
Spindle speed: 12,000 rpm
Spindle torque: 140 Nm
Rapid traverse X/Y/Z: 60 m/min
Chip-to-chip time vertical: 3.0 sec. (3.3 sec. DIN)
Chip-to-chip time horizontal: 4.7 sec. (5.0 sec. DIN)
MACHINE DETAILS
Control system: Siemens 840D
Current type: 3/N/PE
Line frequency: 50/60 Hz
Operating voltage: 400 V
Control voltage: 220/24 V
Connected load: 52 kVA
Rated current: 75 A
Protection: 80 A
Weight: 19,500 kg
Operating hours: 77,374 h
EQUIPMENT
5-axis milling package (up to 5-axis simultaneous milling)
Scraper conveyor, discharge height: 1,050 mm
CIC preparation
Vacuum rotary filter KNOLL VRF250 (steel, cast iron, aluminium, plastic, brass)
High pressure 70 bar with high-pressure pump and variable flow valve
Rinsing gun per pendulum field
Emulsion mist extraction, 2 extraction blowers each 800 m³/h
Rotating viewing window left and right (1,400 mm from machine center)
Automatic loading doors
Central partition for pendulum operation
92 tool holders HSK-A63 (rear magazine)
Blow air
Tool life monitoring
Additional V24 RS232 in control cabinet
BDE/MDE interface (status: machine on, machine running, piece counter)
Marposs (Brankamp) collision monitoring CMS100
3D machine model for kinematic simulation in the CAM programming system
Hydraulic unit 210 bar, 2 clamping circuits, separate system clamping pressure per pendulum field, clamping pressure monitoring
Linear clamping system KOHN
8 pieces hydraulic vise KOHN Multi 2000 MFS 125/680 HD
Two-piece tread platform for the operator across the entire operating width of 6,000 mm
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22326617
- Nombor rujukan:
- AUC-2606277
- Kemas kini:
- terakhir pada 20.07.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Montichiari FPT IndustrieVERUS
Schramberg DMG MORINLX2500SY/700 mit Fanuc Industrieroboter
Babberich JuaristiML-3
Madrid ANAYAKHVM 7000
Monheim am Rhein DMG MORICLX 450 V6
Jerman DROOP + REINFOGS 40 60 C
Nürtingen GF AgieCharmillesProgress V4
Jerman MAZAKAJV-35/240
Nordrhein-Westfalen ANAYAKHVM 6000 P
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.