Mesin Ujian Lingkaran KelilingCadis
81876-50 kN
Data asas
- Nama mesin:
- Mesin Ujian Lingkaran Keliling
- Pengeluar:
- Cadis
- Model:
- 81876-50 kN
- Nombor mesin:
- 54942
- Tahun pembuatan:
- 2025
- Keadaan:
- perlu dibaiki (terpakai)
- Fungsi:
- fungsi terhad
penyediaan
- Lokasi:
- Nordrhein-Westfalen, Jerman
– Jarak: lebih kurang 9,965 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- EXW
percuma
Penerangan
EXW – Dismantling and loading must be organized by the buyer!
TECHNICAL DETAILS
Nominal test force: 50 kN
Test stroke: < 1,400 mm
Usable distance between pressure plates: approx. 800 mm
Test area width: 500 mm
Test speed: continuously variable 0.001–1,200 mm/min
Resolution of displacement measurement: ≤ 0.001 mm
Diameter of pressure plates: 246 mm
Laedpfxjz Tf D Rj Af Hjh
Centering bore: 40 mm
Thread: M12
Hardness: ≥ 56 HRC
Design: Steel, hardened, rotatable at the top and bottom, lockable at 0°
Measuring range of the enveloping circle: 30–250 mm
Design: Probe with bearing rollers
Measurement: Recording under load
MACHINE DETAILS
Control system: Control system with control computer
Test program: Enveloping circle measurement
Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC
Software delivery: USB stick with installation software
Documentation: Version and license status not documented separately
Last calibration: 08/04/2025
Dimensions & Weight
Machine dimensions: approx. 750 × 900 × 1,950 mm
Base frame dimensions: approx. 730 × 900 × 700 mm
Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm
Machine weight: approx. 490 kg
Base frame weight: approx. 50 kg
Voltage supply: 3 × 400 V AC, 50 Hz, N + PE
Type plate power: 3,000 W
Connected power: approx. 3 kVA
EQUIPMENT
Base frame
Control cabinet with control computer
Rotatable pressure plates
Enveloping circle measuring device with probes and bearing rollers
USB stick with installation software
Compressed air connection: Pneumatic connection with shut-off valve
Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually.
The operating PC is not included in the offer.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A23007996
- Nombor rujukan:
- AUC-2610258
- Kemas kini:
- terakhir pada 19.10.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Nordrhein-Westfalen UltimakerS3
Nordrhein-Westfalen GraebenerGK 360
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.