Mesin pembalut pinggirBRANDT
KDF 660 GC
Data asas
- Nama mesin:
- Mesin pembalut pinggir
- Pengeluar:
- BRANDT
- Model:
- KDF 660 GC
- Tahun pembuatan:
- 2014
- Keadaan:
- terpakai
Butiran teknikal
Spesifikasi gandar
Maklumat lanjut
penyediaan
- Lokasi:
- Piemonte, Itali
– Jarak: lebih kurang 10,024 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€1,500.00 (wajib)
percuma
Penerangan
TECHNICAL DETAILS
Feed rate: max. 18 m/min
Panel thickness: min. 10 mm
Panel thickness: max. 60 mm
Panel width: min. 70 mm
Edge thickness: min. 0.4 mm
Edge thickness: max. 12 mm
Number of processing units: 9
Pre-milling unit
Number of units: 1
Motor power: 2.2 kW
Edge magazine and gluing unit
Number of magazine positions: 1
Number of pressure rollers: 4
Edge processing units
Number of edge processing units: 7
End trimming unit
Number of motors: 2
Motor power per motor: 0.35 kW
Flush trimming and rounding unit
Number of motors: 2
Motor power per motor: 0.55 kW
Corner rounding unit
Number of motors: 2
Motor power per motor: 0.35 kW
Grooving unit
Number of motors: 1
Motor power: 3.5 kW
Buffing unit
Number of motors: 2
Motor power per motor: 0.18 kW
MACHINE DETAILS
Total connected load: 22 kW
EQUIPMENT
Thin-edge processing
Thick-edge processing
Solid wood edge processing
EVA hot-melt adhesive system
AIRTEK hot-air system
Top pressure beam with idler rollers
Panel support guides
Pre-milling unit with automatic, time-controlled engagement
Edge roll magazine
EVA glue pot
EVA pre-melter
Set of pressure rollers with 4 pressure rollers
NC positioning of the pressure rollers
End trimming unit
Flush trimming and rounding unit with NC positioning
WD60 corner rounding unit
Grooving unit
Edge scraping unit with NC positioning
Glue scraping unit
Buffing unit
Spraying unit
PowerControl PC20 machine programming software
CE marking
The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods before collection and assumes responsibility for installing, securing and using the machine at the destination.
External reference: 7517
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Jenis pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A23304297
- Nombor rujukan:
- AUC-2611337
- Kemas kini:
- terakhir pada 10.11.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Piemonte PACKSIZEFM 6
Piemonte BIESSESKIPPER 130
Piemonte SELCOEBTR 120 TWIN PUSHER
Piemonte BIESSEAKRON 1330
Piemonte BIESSEROVER C 6.40
Piemonte BRANDTKDF 350 C
Piemonte SELCOWNA 610 TWIN PUSHER
Piemonte HOMAGKAL 310/7/A20/S2
Piemonte STEFANIPERFORMANCE SB
Piemonte BIESSEROVER G 714
Piemonte DMCUNISAND K-I
Piemonte IMACOMBIFORM K I R75 1035 V R3
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.