Mesin pembalut pinggirBRANDT
KDF 660 GC
Data mesin
- Nama mesin:
- Mesin pembalut pinggir
- Pengeluar:
- BRANDT
- Model:
- KDF 660 GC
- Tahun pembuatan:
- 2014
- Keadaan:
- terpakai
Butiran teknikal
- Ketebalan tepi (maks.):
- 12 mm
- Kadar suapan paksi-X:
- 18 m/min
penyediaan
- Lokasi:
- Piemonte, Itali
– Jarak: lebih kurang 10,024 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€850.00 (wajib)
percuma
Penerangan
The machine has the following configuration:
Feed and Guidance
Pressure with idler rollers
Panel support guides
Unit for Panel Processing
Pre-milling unit
Automatic time-controlled engagement
Motor power: 2.2 kW
Edge Gluing
Edge roll magazine
Glue pot for EVA hot-melt adhesive
Premelter for EVA hot-melt adhesive
Hot air system: AIRTEK
Number of pressure rollers: 4
NC-positioned
Edge Processing Units
Number of edge processing units: 7
End Trimming Unit
Number of motors: 2
Motor power: 0.35 kW
Fine Milling Unit for Flush Trimming and Rounding
Number of motors: 2
NC-positioned
Motor power: 0.55 kW
Corner Rounding Unit
Manufacturer model: WD60
Motor power: 0.35 kW
Pre-milling Unit
Motor power: 3.5 kW
Edge Scraping Unit
NC-positioned
Glue Scraping Unit
Polishing Unit
Number of motors: 2
Motor power: 0.18 kW
TECHNICAL DETAILS
Workpiece dimensions
Min. panel height: 10 mm
Max. panel height: 60 mm
Min. panel width: 70 mm
Min. edge thickness: 0.4 mm
Max. edge thickness: 12 mm
Max. feed speed: 18 m/min
MACHINE DETAILS
Machine programming software: PowerControl PC20
Safety standard: CE marking
Total connected load: 22 kW
The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, safeguarding and use of the machine at the destination.
External reference: 7517
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22363377
- Nombor rujukan:
- AUC-2607150
- Kemas kini:
- terakhir pada 20.07.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Itali BRANDTKDF 660GC HIGHFLEX
Miastko Nestro
Piemonte BRANDTKDF 660GC HIGHFLEX
Itali BRANDTKDF 650
Jerman BRANDTKDF 991
Bosnia dan Herzegovina PANHANSS45 Speed
Naprawa 2/26
Stuhr Nestro LufttechnikSeparatorschleuse
Județul Mehedinți BRANDTKDF 650 + HOMAG TFU 140
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.