Pusat pemesinanBIESSE
ROVER C 6.50 CONF 2 EDGE
Data asas
- Nama mesin:
- Pusat pemesinan
- Pengeluar:
- BIESSE
- Model:
- ROVER C 6.50 CONF 2 EDGE
- Tahun pembuatan:
- 2010
- Keadaan:
- terpakai
penyediaan
- Lokasi:
- Switzerland
– Jarak: lebih kurang 9,962 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€6,500.00 (wajib)
percuma
Penerangan
TECHNICAL DETAILS
X-axis working range: 4,600 mm
X-axis working range for edge banding: 3,730 mm
Y-axis working range: 1,535 mm
Y-axis working range for edge banding: 1,500 mm
Panel passage: max. 225 mm
Number of machining fields: 4
Number of rails: 8
Drilling unit
Number of vertical drilling spindles: 29
Number of horizontal drilling spindles, X-axis: 8
Number of horizontal drilling spindles, Y-axis: 4
Total number of drilling spindles: 41
Milling spindles
Number of milling spindles: 2
Number of controlled axes per milling spindle: 4
Motor power per milling spindle: 12 kW
Edge banding
Panel thickness: min. 14 mm
Panel thickness: max. 60 mm
Number of edge magazine positions: 4
Horizontal electrospindle
Number of outlets: 1
Motor power: 3.5 kW
Number of tool positions: 22
EQUIPMENT
Console and rail table
Top-mounted drilling unit
2 top-mounted milling spindles
Automatic tool changer
Gluing unit on the machine's main beam
Hot-melt glue pot
Edge roll magazine with 4 positions
Fixed top-mounted grooving unit for grooves in the X direction
Horizontal electrospindle with NC-controlled positioning
Side-mounted tool magazine with 22 tool positions
Vacuum pump
Chip conveyor
BiesseWorks Advance programming software
Front safety mats
CE marking
The machine is sold and delivered in its actual and legal condition ("as seen and approved"), on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at its destination.
External reference: 8804
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Jenis pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A23304843
- Nombor rujukan:
- AUC-2611349
- Kemas kini:
- terakhir pada 10.11.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.