Pusat pemesinanBIESSE
ROVER B 4.35
Data mesin
- Nama mesin:
- Pusat pemesinan
- Pengeluar:
- BIESSE
- Model:
- ROVER B 4.35
- Keadaan:
- tidak diuji (terpakai)
- Fungsi:
- belum diuji
Butiran teknikal
- Jarak gerakan paksi X:
- 3,200 mm
- Jarak perjalanan paksi-Y:
- 1,300 mm
- Bilangan gelendong:
- 21
- Gerakan pantas paksi X:
- 80 m/min
- Gerakan cepat paksi Y:
- 60 m/min
penyediaan
- Lokasi:
- Piemonte, Itali
– Jarak: lebih kurang 10,022 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€1,500.00 (wajib)
percuma
Penerangan
No minimum price - guaranteed sale to the highest bidder!
TECHNICAL DETAILS
X-axis travel: 3,200 mm
Y-axis travel: 1,300 mm
X-axis rapid traverse speed: 80 m/min
Y-axis rapid traverse speed: 60 m/min
Z-axis rapid traverse speed: 25 m/min
Number of suction traverse beams: 6
Spindles
Number of spindles for vertical drilling: 15
Number of spindles for horizontal drilling in X direction: 4
Number of spindles for horizontal drilling in Y direction: 2
Total number of spindles: 21
Milling unit
Number of axes: 3
Max. speed: 24,000 rpm
Motor power: 9 kW
Tool changer
Number of positions: 10
MACHINE DETAILS
Total power consumption: 26 kW
EQUIPMENT
Vacuum pump
WINDOWS control system
WRT machine programming software
Note: Cones and milling cutters are not included in the scope of supply. Safety guards will be included subject to availability (right side missing).
The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documentation of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination.
External reference: 8174
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A21478292
- Nombor rujukan:
- AUC-2603170
- Kemas kini:
- terakhir pada 16.03.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Trzin BIESSERover C 6.50 CONF.2
Naprawa SCMCompact 23ks
Itali SCMSUPERSET CLASS
Telfs GannomatIndex Pro
Varaždin SCMTECH 80
Bad Laer ScheerPA 4500
San Giovanni Al Natisone SCMTech 99L
Nattheim SCMTECH Z 25
Kežmarok BiesseRover 24 ATS L1
Pederoa WeekeOptimat BHC 550
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.