Relau pembajaan kacaBeneq
FCS 2000
Data mesin
- Nama mesin:
- Relau pembajaan kaca
- Pengeluar:
- Beneq
- Model:
- FCS 2000
- Tahun pembuatan:
- 2012
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Suhu:
- 630 °C
- Kuasa:
- 450 kW (611.83 kuasa kuda)
- Panjang plat:
- 1,400 mm
- Lebar plat:
- 1,100 mm
penyediaan
- Lokasi:
- Etelä-Karjala, Finland
– Jarak: lebih kurang 8,761 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- EXW
percuma
Penerangan
TECHNICAL DETAILS
Machine type: Glass heating furnace for deep processing
Application: Homogeneous heating and subsequent cooling of flat glass
Suitable glass: Clear float glass
Max. glass size: 1,400 × 1,100 mm
Furnace
Furnace width: 1,600 mm
Opening and closing height: 500 mm
Opening mechanism: Electric
Motor power for opening/closing: 1.5 kW
Temperature: 630 °C
Rollers
Roller type: Quartz rollers
Roller diameter: 60 mm
Number of quartz rollers: 46
Number of rollers in cooling section: 22
Roller spacing: 100 mm
Heating
Heating system: Electric with forced convection
Heating power: 450 kW
Control: PLC control with zone-dependent temperature regulation
Speed
Speed range: 1 – 10 m/min
MACHINE DETAILS
Supply voltage: 380 V
Power supply: 3-phase, 5-wire AC
Total weight: 10 t
System configuration
Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table
Process sequence
1. Glass loading: The flat glass is placed on the loading table and transported into the heating section.
2. Heating: In the heating section, the glass is uniformly heated to high temperatures.
3. Coating: After heating, a special coating is applied in the coating section.
4. Cooling (annealing): In the cooling section, the glass is cooled evenly and slowly to reduce internal stress.
5. Glass unloading: The processed glass is conveyed to the unloading table and removed.
FEATURES
- Computer
- Control cabinet
- Power control cabinet
- Loading table
- Heating section
- Coating section
- Cooling section
- Unloading table
- Zone-controllable heating system via PLC control
- Forced convection system for uniform heat distribution
- Quartz rollers with close spacing for precise glass guidance
- Integrated cooling section with 22 rollers for controlled glass cooling
The furnace has been dismantled into components of approximately two meters in length. This enables transportation by standard trucks.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A19370221
- Nombor rujukan:
- AUC-2506116
- Kemas kini:
- terakhir pada 20.06.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Oostvoorne DominioniP55R
Jerman JuwelPQ6-SU/PQ3-SU
Borken Tool-TempHVD-G02
Dortmund VEIVEI-GB-KO
Maasmechelen Bottero520LAMe 37
Pleystein KnoppSilikant-2500
Łask TUBULAR JUICE UHT STERILIZER 11 TONSKF ENGINEERING
Yiğitler GİRMAKSAN GLASS MACHINERYGM-1000-1200-1400-1600-1800-2000-2500H
Roreto HOMAGKFL 526 / 10 / A3 / L / 25
Pančevo TamglassProE-2442-CTS-20
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.