Pemesinan CNC

AUERTECH BL 100A

Used Machine

Year of Manufacture: 2005


Features and Technical Specifications:

- Auertech BL 100A log-house milling machine

- H&M feed and positioning table with pusher

- For producing chalet corner joints by milling all four sides of the log beam in a single clamping operation

- Machining performed by 2 vertical and 2 horizontal milling spindles

- Machining dimensions: 140 × 200 mm

- Milling shafts: 30 mm

- Cutter dimensions: maximum 4 × 220 × 100 mm

- Motor power: 2 × 4.0 kW and 2 × 3.0 kW

- Speed: 4,200 rpm

- Feed: hydropneumatic, infinitely variable, with rapid traverse

- Operation: two-hand control or via PLC control

- Milling depth adjustment: via spindle with SIKO counter

- Workpiece clamping device: 2 × vertical pneumatic

- Dust extraction: underfloor extraction hood, 160 mm

- Complete with electrical system, PLC control, and pneumatics

- Equipped with integrated end-grooving unit, horizontal drilling unit, and under-table crosscut saw

- Enclosed machine housing with swing-up protective cover, gas spring, and viewing window


Horizontal clamps in the machine table:

- 2 horizontal clamps

- Pneumatic actuation from the front

- Automatic clamping cycle via the PLC control system


Integrated face milling unit:

- Milling spindle: 30 mm

- Maximum tool dimensions: 180 × 40 mm

- Motor power: 3.0 kW

- Speed: 4,200 rpm

- Feed: hydropneumatic, infinitely variable, with rapid traverse

- Height adjustment: via spindle with SIKO counter

- Workpiece clamping device: 1 × additional vertical pneumatic clamping

- Integrated with electrical and pneumatic systems


Integrated horizontal drilling unit:

- With drill guide and splinter guard

- Drill diameter: maximum 30 mm, 20 mm included

- Motor power: 1.1 kW

- Speed: 1,500 rpm

- Feed: pneumatic, infinitely variable, with rapid traverse for the idle stroke

- Height adjustment: via spindle with SIKO counter

- Workpiece clamping device: 1 × additional vertical pneumatic clamping

- Integrated with electrical and pneumatic systems


Integrated under-table crosscut saw:

- For automatic operation only

- Maximum cutting dimensions: 200 × 140 mm (width × height)

- Saw blade diameter: 500 mm

- Motor power: 4.0 kW

- Cutting speed: 86 m/s

- Pneumatic feed

- Pneumatic workpiece clamping device

- Exhaust funnel: 120 mm

- Integrated with electrical and pneumatic systems


Automatic Feeding and Positioning:

- H&M feeding and positioning table with side pusher

- The log is placed manually on the feeding table; it is then automatically positioned by the side pusher and fed into the machine

- Mechanical, pneumatic, and electrical systems on the pusher table
Ijdpfx Anjzk Ni Hj Isbb

- Electrical interface for controlling machine functions

- Feed table length: 9,000 mm

- Discharge table length: 4,000 mm

Tools included: Drill, crosscut saw, and end grooving cutters as shown in the machine photos; grooving cutters as shown in the separate photo