Deduster

AL-KO POWER UNIT 160 P

The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace.

It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops.

Technical data POWER UNIT 160 P :

• Intake connection 160 mm
• Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz
• Max. volume-flow 2,000 m³/h
• Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h
• Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa
• Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long)
Dsdpefydzbofx Alajci
• Filter cleaning Compressed air cleaning
• Filter material Cat. M, el, white washable
• Impact on filter 160 m³/m²/h
• Max. noise level 71 dB(A)
• Residual dust content H3 / (ᐸ0,1 mg/m³)
• Swarf collection volume ca. 165 (241) liter
• Basic controls Micro SPS-Logo Siemens without display
• Electrical connections 5 m connection cable with CEE plug
5 poles, 16 A, with phase inverter
• Compressed air supply ½” standard plug
compressed air consumption 108 Std.l/ 6 bear
• Volume flow monitoring differential pressure cell with warning
lamp on control box
• Dimensions (L x W x H) 1,688 x 830 x 2,050 mm
• Undercarriage 4 plastic castors 125 mm, two of them
steerable, one with locking
• Weight 340 kg
• Design / Control side choice right / left
• Finishing RAL 7001 (silver grey) and
RAL 7035 (light grey)