Mesin pelet untai – pemotong peletAccrapack Systems LTD
Series 750 Pelletizer
Mesin pelet untai – pemotong pelet
Accrapack Systems LTD
Series 750 Pelletizer
FCA VB ditambah cukai perkhidmatan
€6,500
Tahun pembuatan
2011
Keadaan
Terpakai
(fungsi terhad)
Lokasi
Bergen op Zoom 

Data asas
- Nama mesin:
- Mesin pelet untai – pemotong pelet
- Pengeluar:
- Accrapack Systems LTD
- Model:
- Series 750 Pelletizer
- Tahun pembuatan:
- 2011
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- fungsi terhad
Harga & Lokasi
FCA VB ditambah cukai perkhidmatan
€6,500
- Lokasi:
- Bergen op Zoom, Belanda

Hubungi
Butiran tawaran
- ID iklan:
- A23348531
- Kemas kini:
- terakhir pada 17.11.2026
Penerangan
The Accrapak Systems Ltd Series 750 is a compact, base-mounted dry-cutting strand granulation and downstream system for thermoplastic materials.
Key features and technical overview
• Design: Compact combination or stand-alone units consisting of a cooling bath, strand dryer (air knife/air miser), and granulator on a common base frame.
• Model
o 750-3 / other models: For 8–12 strands, throughputs up to approximately 200 kg/h, approximately 2.2 kW, 3–4 m cooling bath.
• Cutting principle: Multi-tooth inclined/helical rotor against a fixed counter blade for uniform cutting. Eccentric bearing housings enable precise readjustment.
Ijdpfx Ao Akvlxegnjtp
• Drive options: Available as a single drive.
• Infeed and handling: Driven upper infeed roller with deep teeth (lubricant-free) and straight infeed tables (also ideal for softer materials).
• Safety & maintenance: The overhung design allows for quick removal of infeed rollers and rotor without disassembling the main bearings. Safety solenoid interlocks on the hood and discharge chute only release these when the machine is completely stopped.
Note: There is transport damage to the control panel housing.
Operating hours are unknown, but due to its use in a pilot plant, they are likely lower than in a production environment.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Key features and technical overview
• Design: Compact combination or stand-alone units consisting of a cooling bath, strand dryer (air knife/air miser), and granulator on a common base frame.
• Model
o 750-3 / other models: For 8–12 strands, throughputs up to approximately 200 kg/h, approximately 2.2 kW, 3–4 m cooling bath.
• Cutting principle: Multi-tooth inclined/helical rotor against a fixed counter blade for uniform cutting. Eccentric bearing housings enable precise readjustment.
Ijdpfx Ao Akvlxegnjtp
• Drive options: Available as a single drive.
• Infeed and handling: Driven upper infeed roller with deep teeth (lubricant-free) and straight infeed tables (also ideal for softer materials).
• Safety & maintenance: The overhung design allows for quick removal of infeed rollers and rotor without disassembling the main bearings. Safety solenoid interlocks on the hood and discharge chute only release these when the machine is completely stopped.
Note: There is transport damage to the control panel housing.
Operating hours are unknown, but due to its use in a pilot plant, they are likely lower than in a production environment.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Kali terakhir dalam talian: minggu lepas
Didaftarkan sejak: 2026
19 Iklan dalam talian
Hantar permintaan
Telefon & Faks
+43 660 2... iklan
Iklan anda telah berjaya dipadamkan
Berlaku ralat
































