Mesin pembengkokBluhm Systeme
e-SolarMark FL
Mesin pembengkok
Bluhm Systeme
e-SolarMark FL
harga tetap ditambah cukai perkhidmatan
€4,800
Keadaan
Terpakai
Lokasi
Borken 

Data mesin
- Nama mesin:
- Mesin pembengkok
- Pengeluar:
- Bluhm Systeme
- Model:
- e-SolarMark FL
- Keadaan:
- tidak diuji (terpakai)
Harga & Lokasi
harga tetap ditambah cukai perkhidmatan
€4,800
- Lokasi:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Hubungi
Butiran tawaran
- ID iklan:
- A22186232
- Nombor rujukan:
- 23922
- Kemas kini:
- terakhir pada 23.06.2026
Penerangan
Bluhm Systems Marking Laser
Here we offer a Bluhm Systems marking laser.
Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested).
Introduction:
The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards.
The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. The marking unit with laser head (scanning head) with focusing lens.
2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside.
The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm.
Laser specification in standard configuration
Ncedpszgci Eefx Apysu
Laser type: Fiber laser
Laser output power: FL2 model: 19W; typical
Wavelength: 1062 nm typical
Internal modulation: 20 to 80 kHz
Scanner head description:
Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating.
F-Theta
Lens types and their properties:
Lens marking field: 70x70 mm to 300 x 300 mm
Focal length: B 192 mm
Operating environment conditions:
Relative humidity: up to 80%, non-condensing
Operating temperature: 5 - 40°C
Recommended operating temperature: 15-25°C
Dimensions W x H x D
Laser unit: 122 x 108 x 495 mm
Control unit: 520 x 380 x 215 mm
Cable length, marking/control unit: 3 m
Weight, marking unit: 5 kg
Weight, control unit: 15 kg
Mains voltage
115/230 VAC, 50/60 Hz, single-phase.
Power consumption, FL2 model: 450W
Type: e-SolarMark FL
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We would be happy to answer any further questions you may have by phone.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Here we offer a Bluhm Systems marking laser.
Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested).
Introduction:
The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards.
The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. The marking unit with laser head (scanning head) with focusing lens.
2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside.
The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm.
Laser specification in standard configuration
Ncedpszgci Eefx Apysu
Laser type: Fiber laser
Laser output power: FL2 model: 19W; typical
Wavelength: 1062 nm typical
Internal modulation: 20 to 80 kHz
Scanner head description:
Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating.
F-Theta
Lens types and their properties:
Lens marking field: 70x70 mm to 300 x 300 mm
Focal length: B 192 mm
Operating environment conditions:
Relative humidity: up to 80%, non-condensing
Operating temperature: 5 - 40°C
Recommended operating temperature: 15-25°C
Dimensions W x H x D
Laser unit: 122 x 108 x 495 mm
Control unit: 520 x 380 x 215 mm
Cable length, marking/control unit: 3 m
Weight, marking unit: 5 kg
Weight, control unit: 15 kg
Mains voltage
115/230 VAC, 50/60 Hz, single-phase.
Power consumption, FL2 model: 450W
Type: e-SolarMark FL
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We would be happy to answer any further questions you may have by phone.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Hantar permintaan
Telefon & Faks
+49 2861 ... iklan
Iklan anda telah berjaya dipadamkan
Berlaku ralat





















